Fostex fe206 en

yek · 5th November 2011, 08:29 PM

Hi everyone
I'm new to the site
I bought flat pack enclosure for fe206 full range and I have the drive units
Cabinet is recommend by fostex itself but I couldn't find any info
about do I need to use any damping metarial inside the cabinet if so how?
If someone help me with this I also making bass reflex cabinet for fostex fe103 again same question
Thanks in advance

Godzilla · 6th November 2011, 03:52 PM

I always like to buy some extra wool or acousta stuff for fine tuning speakers. For the back horn start with some behind the driver and listen. Add or reduce depending on what you hear. Sometimes i've stuffed up into the mouth of the horn depending on how hollow things sounded. I'd also stuff the ported box a little too to reduce back waves against the rear of the driver. Enjoy your projects!

yek · 6th November 2011, 05:01 PM

many thanks for your advice i will be on the project next week
i will try to send pics
regards

yek · 16th November 2011, 12:37 PM

[IMG]file:///C:/Users/Emrah/Desktop/101_1411/_IGP6758.JPG[/IMG]

fostex fe206en full range
planet-10 phase plugs
fe208e sigma recommended cabinet

5th November 2011, 08:29 PM	#1
yek diyAudio Member Join Date: Nov 2011	Fostex fe206 en Hi everyone I'm new to the site I bought flat pack enclosure for fe206 full range and I have the drive units Cabinet is recommend by fostex itself but I couldn't find any info about do I need to use any damping metarial inside the cabinet if so how? If someone help me with this I also making bass reflex cabinet for fostex fe103 again same question Thanks in advance

6th November 2011, 03:52 PM	#2
Godzilla diyAudio Member Join Date: Nov 2005 Location: New York	I always like to buy some extra wool or acousta stuff for fine tuning speakers. For the back horn start with some behind the driver and listen. Add or reduce depending on what you hear. Sometimes i've stuffed up into the mouth of the horn depending on how hollow things sounded. I'd also stuff the ported box a little too to reduce back waves against the rear of the driver. Enjoy your projects! __________________ www.zillaaudio.com/bib/bib.asp www.ZillaAudio.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
One pair of Fostex FE206-ESR	boudy	Swap Meet	1	2nd December 2010 02:42 PM
Fostex FE206/207 or others	JC951t	Full Range	45	30th December 2008 01:42 PM
Holes in fostex FE206 BLH?????	chris12345	Full Range	2	5th December 2006 07:57 AM
Advice on cab design for Fostex FE206	Analogue_Adam	Multi-Way	0	6th November 2005 09:02 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th November 2011, 05:01 PM	#3
yek diyAudio Member Join Date: Nov 2011	many thanks for your advice i will be on the project next week i will try to send pics regards

16th November 2011, 12:37 PM	#4
yek diyAudio Member Join Date: Nov 2011	[IMG]file:///C:/Users/Emrah/Desktop/101_1411/_IGP6758.JPG[/IMG] fostex fe206en full range planet-10 phase plugs fe208e sigma recommended cabinet

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)