Goodmans Axiom 8

Monster Vision · 7th October 2011, 07:30 PM

Dear all,. I was newbie here, somehow i just got apair well condition of Goodmans axiom 8 , but i lack an information and T/S of This Kind of Driver,had been searching around on google whole days,and found nothing, just hope anybody out there,can help to support information, and opinion to build and backhorn loaded cabinet instead of open baffle..

Thanks alot

Monster Vision · 9th October 2011, 09:05 AM

anybody??

Godzilla · 9th October 2011, 12:08 PM

Single Driver Website

Maybe?

Monster Vision · 9th October 2011, 12:31 PM

Thanks for Post Godzilla,.but i don't think this is the correct site to explore by.... somehow i need T/S parameter (which make me surf for aweeks with nothings

) and opinion about how this driver sounds with TL box .Metronome or maybe Back horn loaded, which have been used by Fostex 8"... anybody experience on this case?

digits · 10th October 2011, 07:25 PM

I doubt you are gonna find much info on the baby axiom.
I would almost by default start off by adding a high efficiency tweeter with about 10uf polyprop in series. The original boxes in that range came with an adjustable tweeter with a build in crossover set to about 5kHz.

If the axiom 10 is something to go about, the motor is not strong enough for open baffle, and needs a quite large ported design.

Monster Vision · 10th October 2011, 07:30 PM

Dear Digits. Unfortunately, i was got almost tears off Original Boxes. somehow the unit was very excellent condition, (might be Post if you are like to

) and anyways, right now i was starting build the TQWT to suites this Speaker.. in references... in any kind of information regarding to this driver, please post it

7th October 2011, 07:30 PM	#1
Monster Vision diyAudio Member Join Date: Feb 2009	Goodmans Axiom 8 Dear all,. I was newbie here, somehow i just got apair well condition of Goodmans axiom 8 , but i lack an information and T/S of This Kind of Driver,had been searching around on google whole days,and found nothing, just hope anybody out there,can help to support information, and opinion to build and backhorn loaded cabinet instead of open baffle.. Thanks alot

9th October 2011, 12:08 PM	#3
Godzilla diyAudio Member Join Date: Nov 2005 Location: New York	Single Driver Website Maybe? __________________ www.zillaaudio.com/bib/bib.asp www.ZillaAudio.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Goodmans Axiom 301	skodajag	Full Range	3	21st December 2011 04:26 PM
Selling Goodmans Axiom 80 and Axiom 301	gdmax	Swap Meet	2	9th December 2011 02:34 AM
Goodmans Axiom 100	ChrisA	Multi-Way	3	6th July 2010 10:49 PM
Goodmans AXIOM 301	sigurd	Multi-Way	8	10th April 2007 07:33 PM
Goodmans Axiom 300	Swalabr	Multi-Way	8	2nd June 2004 05:42 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th October 2011, 09:05 AM	#2
Monster Vision diyAudio Member Join Date: Feb 2009	anybody??

9th October 2011, 12:31 PM	#4
Monster Vision diyAudio Member Join Date: Feb 2009	Thanks for Post Godzilla,.but i don't think this is the correct site to explore by.... somehow i need T/S parameter (which make me surf for aweeks with nothings ) and opinion about how this driver sounds with TL box .Metronome or maybe Back horn loaded, which have been used by Fostex 8"... anybody experience on this case?

10th October 2011, 07:25 PM	#5
digits diyAudio Member Join Date: Apr 2011	I doubt you are gonna find much info on the baby axiom. I would almost by default start off by adding a high efficiency tweeter with about 10uf polyprop in series. The original boxes in that range came with an adjustable tweeter with a build in crossover set to about 5kHz. If the axiom 10 is something to go about, the motor is not strong enough for open baffle, and needs a quite large ported design.

10th October 2011, 07:30 PM	#6
Monster Vision diyAudio Member Join Date: Feb 2009	Dear Digits. Unfortunately, i was got almost tears off Original Boxes. somehow the unit was very excellent condition, (might be Post if you are like to ) and anyways, right now i was starting build the TQWT to suites this Speaker.. in references... in any kind of information regarding to this driver, please post it

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)