Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Woden Design (Wessex ML-TL) Aluminum Cabinet ?
Woden Design (Wessex ML-TL) Aluminum Cabinet ?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 16th September 2011, 08:55 PM   #1
tms325i is offline tms325i
diyAudio Member
 
Join Date: Sep 2011
Default Woden Design (Wessex ML-TL) Aluminum Cabinet ?

Hello, Im new to the speaker design world so please bear with me... I am looking at the Dual Driver, CHR-70, Wessex ML-TL cabinet design with the drivers mounted on the short side as in page two (left side) here: http://homepage.mac.com/tlinespeaker...v92-151209.pdf

I am looking to keep the same design, however, I want the front and back to be 5.5" with a curved 2.25" radius. I will keep the exact same height 43.5" and adjust the depth of the cabinet to match the total volume. Is this a feasable change to the design? Just looking into my options as my material limits the box dimensions slightly. I have both 1/2" and 3/8" stock and want a curved front and back. I have included a top view for a better understanding.

Thanks - I am completely impressed with this forum and the Mark Audio Support...
Attached Images
File Type: jpg top view speaker draft.jpg (44.6 KB, 185 views)
  Reply With Quote
Old 16th September 2011, 09:10 PM   #2
planet10 is offline planet10  Canada
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Woden Design (Wessex ML-TL) Aluminum Cabinet ?
The critical parameters are internal height, cross-section, vent size & distance from the bottom, and (average) driver distance from the top (with 2 facing the same way as close as possible). You can change cross-section shape as long as you don't get a severe aspect ratio or change the area. I did similar when i morped Scott's EL166 ML-TL to make out MTM FAST. When we finish playing with the design we will add some biggish champhers to the sides.

Click the image to open in full size.

dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 16th September 2011, 09:38 PM   #3
tms325i is offline tms325i
diyAudio Member
 
Join Date: Sep 2011
Dave, very cool, thanks for the fast response. I am assuming the cross sectional change is not too severe, I am keeping the same internal height, port size and speaker height placement as the original. My other concern was the curved front and back portions and any problems that may arise due to that change.

-Tom
  Reply With Quote

Reply


Woden Design (Wessex ML-TL) Aluminum Cabinet ?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
What's the difference between a TL, a ML-TL and a TQWT? Bricolo Multi-Way 85 18th September 2014 07:15 AM
Collated Design Criteria/dimensions for Ariel ML-TL Design talsius Full Range 1 13th October 2011 05:28 AM
Can anyone help TL or ML-TL for Alpair 10 _henry_ Full Range 3 31st December 2008 06:31 AM
ML-TL or ML-TQWT with very low Qt driver Henkjan Full Range 6 29th September 2006 02:29 PM
Small box for FE103 - ML TL or ML TQWT? ChuckT Full Range 15 28th July 2004 05:56 AM


New To Site? Need Help?

All times are GMT. The time now is 12:32 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki