diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Full Range (http://www.diyaudio.com/forums/full-range/)
-   -   Tangband W3-1364SA 3" bamboo driver in the Cyburg-Needle? (http://www.diyaudio.com/forums/full-range/188908-tangband-w3-1364sa-3-bamboo-driver-cyburg-needle.html)

Guiria 12th May 2011 10:01 PM

Tangband W3-1364SA 3" bamboo driver in the Cyburg-Needle?
 
As the thread title suggests.

I have a pair of TB 3" W3-1364SA bamboo drivers that I would like to build into the Cyburg Needle design. Can anyone make suggestions as to whether or not the 3" bamboo will be a good fit?

Some forum threads suggest that most 3" TB drivers will work relatively well in the Cyburg Needle but just wanting to hear of any feedback before I take the plunge :)


All times are GMT. The time now is 09:11 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio

Wiki