decware dm944 or 945 ?

norman bates · 03:42 AM

anyone play with these ?

looks to be an 8" silver flute run wide open with a single cap on a hivi rt2c.

http://www.decware.com/newsite/DM945.html

Norman

60ndown · 30th April 2011, 12:38 AM

yesterday i got a pair of these

https://www.madisound.com/store/prod...roducts_id=843

playing in a 'boombox' they share about 1.5 cubic feet.... sealed

the sound is very warm, LOTS of bass, mids and highs are recessed.

a great speaker in my opinion.

NiToNi · 9th May 2011, 04:33 PM

I think it's the RT1C-A (5 ohm) rather than the RT2C (compare pictures).

Not sure about the DM945 but I believe the DM944 has a crossover frequency of 8 kHz.

I think also that the internal volume is 15 litres.

I'm looking to DIY this design and would appreciate if someone could help with the port length in a 0.5 cu ft and a 2" flared port.

60ndown · 10th May 2011, 04:05 AM

ive been thinking the same, build a $900.00 pair of Decware speakers for $240.

the port has to be between 1 and 5" long, its only plastic pipe, cut a few lengths play some test tones and listen

60ndown · 10th May 2011, 04:07 AM

Quote:

Originally Posted by NiToNi

I think it's the RT1C-A (5 ohm) rather than the RT2C (compare pictures).

N

i dont see an RT1C-A at madisound?

you got a link?

29th April 2011, 03:40 AM	#1
norman bates diyAudio Member Join Date: Nov 2003 Location: iowa	decware dm944 or 945 ? anyone play with these ? looks to be an 8" silver flute run wide open with a single cap on a hivi rt2c. http://www.decware.com/newsite/DM945.html Norman Last edited by norman bates; 29th April 2011 at 03:42 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Decware ZKIT1	adason	Swap Meet	0	29th January 2010 06:12 PM
Hafler 945 JFET Preamp	john65b	Swap Meet	0	10th July 2009 02:52 AM
Decware DFR8	Jamesuk1	Full Range	23	15th January 2009 05:40 PM
Hafler 945 Preamp Issues	john65b	Solid State	0	21st March 2008 02:21 PM
Decware OB: is this possible?	pjanda1	Full Range	3	29th January 2008 04:51 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th April 2011, 12:38 AM	#2
60ndown diyAudio Member Join Date: Apr 2011	yesterday i got a pair of these https://www.madisound.com/store/prod...roducts_id=843 playing in a 'boombox' they share about 1.5 cubic feet.... sealed the sound is very warm, LOTS of bass, mids and highs are recessed. a great speaker in my opinion.

9th May 2011, 04:33 PM	#3
NiToNi diyAudio Member Join Date: Oct 2004	I think it's the RT1C-A (5 ohm) rather than the RT2C (compare pictures). Not sure about the DM945 but I believe the DM944 has a crossover frequency of 8 kHz. I think also that the internal volume is 15 litres. I'm looking to DIY this design and would appreciate if someone could help with the port length in a 0.5 cu ft and a 2" flared port.

10th May 2011, 04:05 AM	#4
60ndown diyAudio Member Join Date: Apr 2011	ive been thinking the same, build a $900.00 pair of Decware speakers for $240. the port has to be between 1 and 5" long, its only plastic pipe, cut a few lengths play some test tones and listen

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)