Building a openbaffle with goldwood h frame need good fullrange

bigfishe · 03:40 PM

Well guys I sold my gallos and taking the plunge into openbaffle!
I have the MJK H-Frames and would like a good
Full range to top it.the H-frames will be driven by a electon kinetics eagle 400 and the full range with a transcendent SEOTL crossed over with the Dahlquist LP-1
Any vote on witch full range driver to use?

c2cthomas · 2nd December 2010, 07:29 PM

Quote:

Originally Posted by bigfishe

Any vote on witch full range driver to use?

Hi Bigfishe - with all of the development work the he, and his team, have been putting into design and development I'm just going crazy to try out some of the new Mark Audio drivers. I'll need to go over to his site and take a look at which one to put on my wish list for an OB - most likely to go into a FAST configuration.

bigfishe · 2nd December 2010, 08:02 PM

I'm not up on the FAST method
mark audio sounds nice but I only have 1.5 watts per
To play with

c2cthomas · 2nd December 2010, 08:19 PM

1.5 watts? - THAT makes things a bit of a challenge Hmmmmm. Even the most efficient drivers I can think of running on that amount of limited power will get to around a 100db's max and while that is loud it will play the devil with dynamics. A good horn tweeter comes to mind but then things start getting messy with how high can you take the woofer vs. how low can the horn go.

Nelson Pass · 2nd December 2010, 08:27 PM

Lowther PM6A's.

c2cthomas · 2nd December 2010, 08:33 PM

bigfishe · 2nd December 2010, 08:33 PM

That's what I had in mind.Waiting
for a phone call from Jon

bigfishe · 2nd December 2010, 08:39 PM

I might be able to run my f1 clone if I get it up to snuff.
That should give more options at ten watts per.

Vix · 3rd December 2010, 11:47 AM

In that case Seas Exotic?

MJK · 3rd December 2010, 12:33 PM

I have recently been using the Fostex FE-126E in my set-up and it works really well. I think a smaller full range driver would be an advantage, it does not need to play low and should extend higher than a bigger full range driver.

2nd December 2010, 03:37 PM	#1
bigfishe diyAudio Member Join Date: Jan 2007 Location: Nashville	Building a openbaffle with goldwood h frame need good fullrange Well guys I sold my gallos and taking the plunge into openbaffle! I have the MJK H-Frames and would like a good Full range to top it.the H-frames will be driven by a electon kinetics eagle 400 and the full range with a transcendent SEOTL crossed over with the Dahlquist LP-1 Any vote on witch full range driver to use? Last edited by bigfishe; 2nd December 2010 at 03:40 PM.

2nd December 2010, 08:19 PM	#4
c2cthomas 49 - for the 16th time diyAudio Member Join Date: Oct 2006 Location: Near "Music City" (Nashville Tennessee)	1.5 watts? - THAT makes things a bit of a challenge Hmmmmm. Even the most efficient drivers I can think of running on that amount of limited power will get to around a 100db's max and while that is loud it will play the devil with dynamics. A good horn tweeter comes to mind but then things start getting messy with how high can you take the woofer vs. how low can the horn go. __________________ "You can't always get what you want" K. Richards/M. Jagger *** "Next time I will know some things better" Zen Mod

2nd December 2010, 08:33 PM	#6
c2cthomas 49 - for the 16th time diyAudio Member Join Date: Oct 2006 Location: Near "Music City" (Nashville Tennessee)	__________________ "You can't always get what you want" K. Richards/M. Jagger *** "Next time I will know some things better" Zen Mod

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MJK’s Jordan JX92S OB with a Goldwood GW-1858 Woofer in an H Frame	Jim Shearer	Full Range	606	25th April 2012 11:11 PM
AN Super 10 and H Frame Goldwood	tonytex	Full Range	13	13th June 2010 08:59 PM
Modular Acoustat frame building advice?	hella356	Planars & Exotics	4	30th March 2010 02:13 AM
Pryamid Clear Woofers or Goldwood Heavy Duty Woofers any Good?	form109	Subwoofers	4	20th March 2010 08:59 PM
Goldwood G-8003 8" Fullrange	Carlp	Full Range	15	15th February 2008 09:24 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd December 2010, 08:02 PM	#3
bigfishe diyAudio Member Join Date: Jan 2007 Location: Nashville	I'm not up on the FAST method mark audio sounds nice but I only have 1.5 watts per To play with

2nd December 2010, 08:27 PM	#5
Nelson Pass The one and only Join Date: Mar 2001	Lowther PM6A's.

2nd December 2010, 08:39 PM	#8
bigfishe diyAudio Member Join Date: Jan 2007 Location: Nashville	I might be able to run my f1 clone if I get it up to snuff. That should give more options at ten watts per.

3rd December 2010, 11:47 AM	#9
Vix diyAudio Member Join Date: Nov 2003 Location: Somewhere on Planet Earth	In that case Seas Exotic?

3rd December 2010, 12:33 PM	#10
MJK Account disabled at member's request Join Date: Feb 2002 Location: Clifton Park, NY	I have recently been using the Fostex FE-126E in my set-up and it works really well. I think a smaller full range driver would be an advantage, it does not need to play low and should extend higher than a bigger full range driver.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read