|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
6th October 2010, 01:20 PM
|
#1 |
|
diyAudio Member
Join Date: Oct 2004
|
Industrial Dest top speakers....what driver should I use?
Hi All, I found these bits the other day and decided to build a pair of dest top speakers around them. They are at the shop so I don't have any dimentions but they are about 11" tall x 6" wide. They are the chrome air inlets on either side of the seat. I'll have better pix soon.
I also need to find someone to do the CNC cutting of MDF so I can make a cab that matches the contours of the front things (I don't know what to call them) So.... 1. What drivers? 2. Who does that CNC MDF cutting?   
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How to keep stuffing on top of driver in place? | Glowbug | Full Range | 4 | 17th September 2009 01:18 AM |
| News top of the line speakers from CES | inertial | Multi-Way | 4 | 18th January 2009 07:19 PM |
| industrial music for industrial people | Stan Gielewski | Music | 45 | 8th October 2008 04:34 PM |
| Desk-top tuner, amp and speakers | AIA | Everything Else | 6 | 7th February 2006 08:36 AM |
| Inexpensive 8" driver with steep top-end roll-off | The Paulinator | Multi-Way | 1 | 6th June 2003 07:25 AM |
| New To Site? | Need Help? |
| Page generated in 0.06239 seconds (68.02% PHP - 31.98% MySQL) with 10 queries |
