goodmans

pmchoong · 5th October 2010, 07:03 PM

Hi everybody

i have a pair of goodmans fullrange drivers, which i don't know the model of made. The driver is similar to the one drawn, it is a 5". I am thinking of an alternative cabinet like this. I did a half chilli and they sound good. Please suggest. Thanks.

chris661 · 5th October 2010, 09:00 PM

It would be extremely helpful if you provided some measured parameters of the driver, or some model numbers (or better still, pictures! - chances are that one of us has seen them...). This would help us determine exactly what kind of cabinet, of which dimensions, would suit your driver.

Even so, nice drawings.

Chris

pmchoong · 6th October 2010, 12:41 AM

Hi David

Sorry I do not have any measured parameters. I don't have the means to do so. I have search for some goodmans speaker and the attached pics looks like the same driver.

pmchoong · 6th October 2010, 01:54 AM

Sorry, I meant to say

Hi Chris

pmchoong · 6th October 2010, 02:19 AM

Hi Chris

Also, there was nothing written on the back of the driver except the brand 'Goodsmans' and its logo and the words 'made in England'. No ohms or sensitivity mentioned.
Thanks again.

pmchoong · 6th October 2010, 05:09 PM

Surely someone here will recognised the Goodmans?

chris661 · 6th October 2010, 05:45 PM

It's only been a few hours since you posted the pictures. People on this forum are from all over the world, so you're unlikely to have given everyone a fair chance to have a look.

Patience.

pmchoong · 6th October 2010, 06:13 PM

Hi Chris

Ah, sorry....OK,i'll be patience

. Thanks.

Puffin · 6th October 2010, 09:16 PM

I think I have 2 of these Drive units in the garage, bought from an audiojumble. Will have a look.

Puffin · 09:34 PM

The baffle appears to have been contoured on the cabs shown above, but they appear to be the same.

There are no specs on the box apart from the numbers on the likd. They measure at 4.7ohms, so I assume a nominal 4ohm.

Pmchoong. Found a link to what appear to be your speakers.

http://reviews.ebay.com/GLL-IMAGIO-1...00000010354321

5th October 2010, 09:00 PM	#2
chris661 diyAudio Member Join Date: Feb 2008 Location: Sheffield Blog Entries: 8	It would be extremely helpful if you provided some measured parameters of the driver, or some model numbers (or better still, pictures! - chances are that one of us has seen them...). This would help us determine exactly what kind of cabinet, of which dimensions, would suit your driver. Even so, nice drawings. Chris __________________ "Throwing parts at a failure is like throwing sponges at a rainstorm." - Enzo My setup: http://www.diyaudio.com/forums/multi...tang-band.html

6th October 2010, 01:54 AM	#4
pmchoong diyAudio Member Join Date: Jan 2008 Location: Kuala Lumpur	apology Sorry, I meant to say Hi Chris

6th October 2010, 05:45 PM	#7
chris661 diyAudio Member Join Date: Feb 2008 Location: Sheffield Blog Entries: 8	It's only been a few hours since you posted the pictures. People on this forum are from all over the world, so you're unlikely to have given everyone a fair chance to have a look. Patience. __________________ "Throwing parts at a failure is like throwing sponges at a rainstorm." - Enzo My setup: http://www.diyaudio.com/forums/multi...tang-band.html

6th October 2010, 06:13 PM	#8
pmchoong diyAudio Member Join Date: Jan 2008 Location: Kuala Lumpur	Hi Chris Ah, sorry....OK,i'll be patience. Thanks.

6th October 2010, 09:31 PM	#10
Puffin diyAudio Member Join Date: Feb 2006 Location: U.K	The baffle appears to have been contoured on the cabs shown above, but they appear to be the same. There are no specs on the box apart from the numbers on the likd. They measure at 4.7ohms, so I assume a nominal 4ohm. Pmchoong. Found a link to what appear to be your speakers. http://reviews.ebay.com/GLL-IMAGIO-1...00000010354321 Last edited by Puffin; 6th October 2010 at 09:34 PM.


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th October 2010, 02:19 AM	#5
pmchoong diyAudio Member Join Date: Jan 2008 Location: Kuala Lumpur	Hi Chris Also, there was nothing written on the back of the driver except the brand 'Goodsmans' and its logo and the words 'made in England'. No ohms or sensitivity mentioned. Thanks again.

6th October 2010, 05:09 PM	#6
pmchoong diyAudio Member Join Date: Jan 2008 Location: Kuala Lumpur	Surely someone here will recognised the Goodmans?

6th October 2010, 09:16 PM	#9
Puffin diyAudio Member Join Date: Feb 2006 Location: U.K	I think I have 2 of these Drive units in the garage, bought from an audiojumble. Will have a look.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Goodmans Triaxiom 212	sideways	Full Range	1	11th July 2009 07:17 AM
Goodmans?	paba	Full Range	3	20th February 2008 02:06 AM
Goodmans 201	KevinTams	Full Range	9	28th August 2005 07:35 PM
Goodmans 201's	KevinTams	Full Range	12	30th July 2005 09:23 AM
Goodmans Woofer	Tomv	Multi-Way	6	6th June 2005 07:23 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read