Tall Corner TABAQ

Equilibrium · 11th April 2010, 08:50 AM

Please criticize

this design before I up and waste a lot of wood.

The air column behind the driver (w3-871) is the same length and has the same cross sectional area as original TABAQ. Port diameter is 2”, and length is 5.25”.

They are going to be my breakfast room/kitchen speakers. Driver height is just about midway between ear height of those sitting and standing.

Scottmoose · 11th April 2010, 01:32 PM

The vent is going to have horrendous resonance issues unless you know exactly what you're doing. Otherwise should do fine.

Equilibrium · 11th April 2010, 10:46 PM

I suspected as much but being relatively clueless

, not to mention stubborn, I went ahead and put form over function.

Thank you very much for the reality check.

Redesign!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TABAQ TL for Tang Band	Bjohannesen	Full Range	323	8th May 2012 05:11 AM
Tabaq to the future.	raypalmer	Multi-Way	7	6th April 2009 03:59 AM
My TABAQ Build Thread	Consul	Full Range	17	3rd September 2008 09:50 PM
TABAQ and Needle hybrid	lepomis	Full Range	38	29th June 2008 09:49 PM
Folded TABAQ	BoomieMCT	Full Range	3	7th July 2007 10:08 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

11th April 2010, 01:32 PM	#2
Scottmoose diyAudio Member Join Date: Mar 2005 Location: UK	The vent is going to have horrendous resonance issues unless you know exactly what you're doing. Otherwise should do fine.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)