diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Full Range (http://www.diyaudio.com/forums/full-range/)
-   -   Tall Corner TABAQ (http://www.diyaudio.com/forums/full-range/164890-tall-corner-tabaq.html)

Equilibrium 11th April 2010 08:50 AM

Tall Corner TABAQ
 
1 Attachment(s)
Please criticize :magnify: this design before I up and waste a lot of wood.

The air column behind the driver (w3-871) is the same length and has the same cross sectional area as original TABAQ. Port diameter is 2, and length is 5.25.

They are going to be my breakfast room/kitchen speakers. Driver height is just about midway between ear height of those sitting and standing.

Scottmoose 11th April 2010 01:32 PM

The vent is going to have horrendous resonance issues unless you know exactly what you're doing. Otherwise should do fine.

Equilibrium 11th April 2010 10:46 PM

1 Attachment(s)
I suspected as much but being relatively clueless :confused:, not to mention stubborn, I went ahead and put form over function.

Thank you very much for the reality check.

Redesign!


All times are GMT. The time now is 02:21 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2