Mar-Kel70 in Sweden - Page 24

Rullknufs · 9th June 2010, 04:44 PM

Quote:

Originally Posted by planet10

Blu-Tak is specifically formulated to leave no residue.

dave

Do i have to get the original Blu-Tack från Bostik or can i go with like any Blu-Tack (häftmassa)?

chrisb · 9th June 2010, 04:54 PM

Quote:

Originally Posted by Rullknufs

Do i have to get the original Blu-Tack från Bostik or can i go with like any Blu-Tack (häftmassa)?

Well, I think it is a trade mark name, but as no doubt our friend Wikipedia would suggest, there are numerous similar products available internationally.

planet10 · 9th June 2010, 05:02 PM

I don't know, i usually use felt pads, and have only tried the brand name blu-tak. I have tried duct-seal, works as well, but will stain.

dave

Rullknufs · 13th June 2010, 05:19 PM

Now i think of mailing the places i will buy the stuff from and tell them to bring it home.
2 CSS EL70
1 sheet of 15mm ply (or should i go with 18?)

planet10 · 13th June 2010, 10:26 PM

15mm is what we would use for this application.

dave

Rullknufs · 14th June 2010, 09:12 AM

Okay, thanks.

Is it possible to get a cutsheet? I guess this can be fit on a smaller sheet than 1250x2500.
In that case it would be cheaper for me, and for the bassmodules i will probably be using 18mm and not 15mm.

And, can i see any finished ones somewhere?

planet10 · 14th June 2010, 06:46 PM

We have talked about sooo many boxes i'm not sure where we are? Which box?

dave

Rullknufs · 14th June 2010, 06:48 PM

Quote:

Originally Posted by planet10

We have talked about sooo many boxes i'm not sure where we are? Which box?

dave

The Mar-Kel EL70.

Rullknufs · 14th June 2010, 09:36 PM

If i get a cutsheet i will buy a 12mm particle board and build a box and see if it's easy or not. It will only cost like 13-14$ so i think it's definately worth it!

chrisb · 14th June 2010, 09:47 PM

Quote:

Originally Posted by Rullknufs

The Mar-Kel EL70.

Quote:

Originally Posted by Rullknufs

If i get a cutsheet i will buy a 12mm particle board and build a box and see if it's easy or not. It will only cost like 13-14$ so i think it's definately worth it!

IINM, there are actually 2 boxes for the EL70 that could be confused:

what we'd call the "prime size" Mar-Kel70 (i.e. 3 layered side panels with integral slot ports) - not a particularly easy or quick build

http://homepage.mac.com/tlinespeaker...map-110410.pdf

and the smaller "milli" sized mMar-Kel70

http://homepage.mac.com/tlinespeaker...map-231009.pdf

which is a pretty darned easy build - although it can get tricky if you forget the wall padding before attaching the final side.

9th June 2010, 05:02 PM	#233
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 5	I don't know, i usually use felt pads, and have only tried the brand name blu-tak. I have tried duct-seal, works as well, but will stain. dave __________________ community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

13th June 2010, 10:26 PM	#235
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 5	15mm is what we would use for this application. dave __________________ community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

14th June 2010, 06:46 PM	#237
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 5	We have talked about sooo many boxes i'm not sure where we are? Which box? dave __________________ community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Phonic - MAR 4	mudanov	Instruments and Amps	1	4th August 2011 12:44 AM
Mar-Ken10^2, double the love	planet10	Planet 10 hifi	21	16th November 2010 02:38 AM
questions regarding Mar-Ken10 plans	zottinger	Planet 10 hifi	6	10th August 2010 08:37 PM
Phonic Mar 6 Amp	kinser	Solid State	8	11th October 2007 11:05 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th June 2010, 05:19 PM	#234
Rullknufs diyAudio Member Join Date: Mar 2010 Location: Sweden	Now i think of mailing the places i will buy the stuff from and tell them to bring it home. 2 CSS EL70 1 sheet of 15mm ply (or should i go with 18?)

14th June 2010, 09:12 AM	#236
Rullknufs diyAudio Member Join Date: Mar 2010 Location: Sweden	Okay, thanks. Is it possible to get a cutsheet? I guess this can be fit on a smaller sheet than 1250x2500. In that case it would be cheaper for me, and for the bassmodules i will probably be using 18mm and not 15mm. And, can i see any finished ones somewhere?

14th June 2010, 09:36 PM	#239
Rullknufs diyAudio Member Join Date: Mar 2010 Location: Sweden	If i get a cutsheet i will buy a 12mm particle board and build a box and see if it's easy or not. It will only cost like 13-14$ so i think it's definately worth it!

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read