Jordan JX92S MLTL-48 Front Baffle Question

batdan · 2nd December 2009, 12:19 AM

Hi,

I am building the MLTL-48 enclosure for the JX92S driver out of 18mm (slightly under 3/4") ply. Once I router the recess for the driver and bevel the back of the driver cutout as per the recommendations will there be enough material to sufficiently hold the driver ? I'm still waiting on the driver to arrive but I am assuming about 4mm of recess.

An option would be to glue an additional piece of ply to the back of the baffle around the driver to provide some extra strength, though this would take up some internal volume - is this a issue ?

Thanks,
Dan

planet10 · 2nd December 2009, 12:55 AM

You should be fine...

dave

matt kite · 2nd December 2009, 08:32 AM

Or don't bevel the back of the cutout where the driver fixing positions are

2nd December 2009, 12:19 AM	#1
batdan diyAudio Member Join Date: Oct 2009	Jordan JX92S MLTL-48 Front Baffle Question Hi, I am building the MLTL-48 enclosure for the JX92S driver out of 18mm (slightly under 3/4") ply. Once I router the recess for the driver and bevel the back of the driver cutout as per the recommendations will there be enough material to sufficiently hold the driver ? I'm still waiting on the driver to arrive but I am assuming about 4mm of recess. An option would be to glue an additional piece of ply to the back of the baffle around the driver to provide some extra strength, though this would take up some internal volume - is this a issue ? Thanks, Dan

2nd December 2009, 12:55 AM	#2
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 4	You should be fine... dave __________________ community sites t-linespeakers.org, frugal-horn.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First Impression: GM's Jordan JX92S MLTL Speaker	abpea	Full Range	147	7th October 2009 11:00 PM
Jordan MLTL port question	Ivan Petrov	Full Range	14	18th June 2008 05:42 PM
Best method to hold up stuffing in GM's MLTL with JX92S Jordan's?	Norris Wilson	Full Range	4	13th December 2005 11:29 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd December 2009, 08:32 AM	#3
matt kite diyAudio Member Join Date: Mar 2006 Location: London	Or don't bevel the back of the cutout where the driver fixing positions are

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)