My first speaker project - Page 3

db! · 30th November 2009, 04:22 AM

Suricat - I appreciate the calculations; that's something I'll definitely look into. I'm still trying to tweak with my budget to accommodate the various components.

Pit_hinder - From what I've seen, designing crossovers can get quite complicated. I would prefer to devote my time to the "fun stuff" like amps and such.

Pit Hinder · 30th November 2009, 04:34 AM

"Fun stuff", amps? All I know about active designs is that amperes multiplied by volts result in expensive smells - no way, brother.

Rudi_Ratlos · 30th November 2009, 06:20 AM

Hello db!,

also take a look at these ones:

The picture above: that is my pair of the "Little Susis" (that is how the speakers are called).

They measure 20 (High) x 15 (Broad) x 20 (Deep) cm and have a volume of 3.3 ltrs.
Chassis are Tangband W4-657B Fullrange and Dayton ND20FA-6 tweeter.

The sound of these tiny speakers is exceptional. I don't even miss any depth.

If you want to I can send you a PDF-document on how to build the speakers.

An image of the crossover is included.

Best regards - Rudi_Ratlos

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My First Speaker Project	roadie	Multi-Way	0	23rd April 2008 09:35 PM
New speaker project	blank527	Multi-Way	2	4th December 2007 06:57 PM
first speaker project	abiedoodles	Multi-Way	14	3rd June 2007 09:43 PM
first speaker project...	eisenhower	Multi-Way	14	4th October 2006 10:40 PM
old speaker question, bullet midrange question & link to speaker project	wallijonn	Multi-Way	10	5th November 2002 06:03 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th November 2009, 04:22 AM	#21
db! diyAudio Member Join Date: Nov 2009 Location: Ontario	Suricat - I appreciate the calculations; that's something I'll definitely look into. I'm still trying to tweak with my budget to accommodate the various components. Pit_hinder - From what I've seen, designing crossovers can get quite complicated. I would prefer to devote my time to the "fun stuff" like amps and such.

30th November 2009, 04:34 AM	#22
Pit Hinder diyAudio Member Join Date: Nov 2006 Location: Hannover, Germany	"Fun stuff", amps? All I know about active designs is that amperes multiplied by volts result in expensive smells - no way, brother.

30th November 2009, 06:20 AM	#23
Rudi_Ratlos diyAudio Member Join Date: Jun 2009 Location: Hamburg / Germany	Hello db!, also take a look at these ones: The picture above: that is my pair of the "Little Susis" (that is how the speakers are called). They measure 20 (High) x 15 (Broad) x 20 (Deep) cm and have a volume of 3.3 ltrs. Chassis are Tangband W4-657B Fullrange and Dayton ND20FA-6 tweeter. The sound of these tiny speakers is exceptional. I don't even miss any depth. If you want to I can send you a PDF-document on how to build the speakers. An image of the crossover is included. Best regards - Rudi_Ratlos

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)