Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

What are the models for a  high gain twin pipe resonance tube/back horn
What are the models for a  high gain twin pipe resonance tube/back horn
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 12th October 2009, 01:23 PM   #1
brucegseidner is offline brucegseidner  United States
Account disabled at member's request
Join Date: May 2009
Default What are the models for a high gain twin pipe resonance tube/back horn

It seems that if one wanted to off load a smaller FR driver with some woofer/sub help, that a twin pipe design could be built as a stand/support for the smaller full range cabinet, the drivers aligned one above the other, with the twin pipe continuous with the bottom and back of the full range cabinet. They would be spooning affectionately and the lack of space in the room for another set of sub-speakers would be obviated. Of course it depends on how tall the front pipe would need to be but my hope is that if it had more girth it might need less height. Though I have a dim sense that this issue is more about the length of the tubes than volumn. But if there were no constraints on the length of the back tube perhaps I could keep the front under 30 inches. (It may be that I just need to adapt something like a smoke stack transmission line, a rectangular Shiva for instance.)

I have a pair of Brynns/4.5" Hemp orphans that I would like to relieve of their mucking about in the low frequency realms below 200Hz and down into whale songs by gently blending them with a pair of mystery ten inch subs that I have and for which I am about to get T/S parameters (when I can get to the equipment).

In the mean time I would appreciate some direction. These twin pipes seem a lot like a BIB, open to the top and bringing the whole ceiling into the act. I would like to figure this out because I see a very pleasant Barcolounger for my Brynn in its future.
  Reply With Quote
Old 12th October 2009, 03:04 PM   #2
pjanda1 is offline pjanda1  United States
diyAudio Member
pjanda1's Avatar
Join Date: Jan 2005
Location: Boulder, CO
Spooning Fullrangers:

click through to Maarga
Little Big Horn

Not exactly what you had in mind, but the integrated sub enclosure can certainly work well. I'd think of a high pass on the fullrangers and driving the bass units with the fanciest sub amp (eq functions, etc), you can afford. The First Watt B4 might work perfectly too.

  Reply With Quote


What are the models for a  high gain twin pipe resonance tube/back hornHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tapped Horn and Driver resonance Freq. Bent Subwoofers 44 17th April 2009 11:05 AM
EXPERIMENT - Small driver in a big pipe/horn - does it need a sub? just a guy Full Range 31 18th September 2008 09:52 PM
Got my tube spice models, and tubed CD player page back on the air wa2ise Tubes / Valves 2 20th April 2008 11:07 PM
Using PVC Pipe For A Back Loaded Horn JimOfOakCreek Full Range 13 15th April 2008 07:30 PM
High gain Tube amp problems firebird josh Tubes / Valves 0 24th December 2003 12:32 AM

New To Site? Need Help?

All times are GMT. The time now is 02:22 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio