A thread for Tysen and variations on FAST - diyAudio
Go Back   Home > Forums > Loudspeakers > Full Range

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th May 2009, 06:43 AM   #1
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Blog Entries: 5
Default A thread for Tysen and variations on FAST

A post of this picture of Tysen elicited a large number of requests for more information. So in aid of saving me from answering individual questions multiple times, let;s see if we can cover it here.

Click the image to open in full size.

Tysen (named after our godson in the picture) is a Fostex FF85K & a CSS SDX7 (in both cases my fully modified version).

I chose sealed for the SDX7 because it works well sealed and with a bit of EQ can reach into the 25-30 Hz range in room. Tysen is 17 litres, but anywhere 14-21 litres net (including effect of stuffing).

The FF85KeN is in an aperiodically damped 10:1 taper TL. I wanted to tune the TL as low as i could withing the limited space i had available, Damping starts out really light getting increasingly dense towards the terminus (i call this arrangement a midTL).

Because of the efficiency of the SDX7 is lower than needed for a passive XO, and because it is so much easier, the system is active (biamped).

Click the image to open in full size.

Chris & i are very pleased with how these turned out, and everyone who has heard them has been favourably impressed. First public exposure was on the Sunday of last years' VI diyFEST.

dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 14th May 2009, 07:27 AM   #2
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Blog Entries: 5
Default How we got there..

Tysen was not formed out of whole cloth.

After successfully hatching the mFonken, we still wanted something smaller. This led to the uFonken with the FF85. When we started this we knew that they would often get used with a woofer, and concurrently ordered a Keiga 2.1 amp and built a 14 litre sealed SDX7 woofer to go with the uFonken and hold the Keiga amp.

After listening to this for awhile* we decided that a pair of woofers that would act as stands.

*(not quite as planned -- the satelitte amps in the Keiga were prettry poor sounding, so we fudged that -- turns out that there is a compression cicrcuit in the HF amp chain that when removed improve things immensly)

This is what we started with.

Click the image to open in full size.

I borrowed DCX2496, set upo the old G3 Lombard PowerBook with measuring mic/Fuzzmeasure and played with all sorts of XO arrangements.

With the DCX the only one happy with the sound was the measuring mic, but i learned a lot about XOing the combo -- for instance, as pictured the woofer is upside down -- i got quite severe combing until i fliipped it do the woofer was close to the mid-tweeter.

Attached is one of the FR curves. The limits at the bottom may not be the speaker but the Lombard's analog input and the roll-off at the top is from too long a mic cable. Althou a bit saddle shaped it is +/- 2dB from <30 Hz out to beyond 15k. There is a small amount of lift set at 25 Hz.

In the end i choose a 1st order XO on the woofer & 2nd order Bessel on the midtweeter at about 350 Hz. The low order XO on the woofer helps fill in the baffle-step loss. In this case the natural rolloff of the SDX7 above 1k doesn't hurt either.

A close approximation of this can be implemented as a PLLXO (Passive Line Level XO http://t-linespeakers.org/tech/filters/passiveHLxo.html).

dave
Attached Images
File Type: gif ufonken-wwoof-fr.gif (17.9 KB, 6748 views)
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 14th May 2009, 07:38 AM   #3
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Blog Entries: 5
Default The PLLXO

The parts box yielded a PLLXO at ~ 333 Hz. 0,1, 0.01 uF caps and 10 & 100k Rs (IIRC). I built it into an old Macintosh 800k floppy disk case.

This would actually be best built into the amps.

I thot i'd done a map of the XO, but i've not been able to find it... i may only have sketched it on paper.

dave
Attached Images
File Type: jpg tysen-pllxo.jpg (78.9 KB, 7608 views)
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 14th May 2009, 07:48 AM   #4
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Blog Entries: 5
Default A buffered PLLXO

As set up the PLLXO requires an amp with a 100k input. In aid of more versatility we did a fully biffered version. We put an OpAmp buffer at the in and the out of each filter. We choose opamps so that we could just use 2 9V batteries as a supply. Daniel did a real tidy job, and performabce was pretty good. Not quite as transparent as the unbuffered one on a system that can hack the PLLXO impedance requirements, but better on systems that can't.

To use a PLLXO the HF amp really should have 50k+ impedance, and the preamp needs to be able to drive a 10k load, The 2nd order hipass is the most restrictive bit, the 1st order lowpass makes that work almost anywhere.

Depending on the amps & preamps used you can get probably away with fewer buffers.

I always figured that the Firstwatt B1 would be a good platform for this XO, now i see that Nelson has had the same idea. The B2 Biamp (2nd paragraph coming soon http://www.firstwatt.com/watts_new.htm)

dave
Attached Images
File Type: jpg buffered-comp.jpg (67.8 KB, 2324 views)
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 14th May 2009, 08:03 AM   #5
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Blog Entries: 5
Default The Rectangular Tysen

The 1st pass dsrawing i did was a standard rectangular box... here is one that resides in the UK

Click the image to open in full size.

plans for this one attachec (note, these plans are still not presentation quality, i will be updating them)

dave
Attached Files
File Type: pdf tysen-1st-pass-rectangular.pdf (35.0 KB, 953 views)
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 14th May 2009, 08:14 AM   #6
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Blog Entries: 5
Default Trapezoidal Tysen

Chris made the suggestion that instead of propping the front up to get the right angle of fire on the FF85, we build a trapezoid similar to Scott Dunn's bipolar WR126.

This ended up working really well and turned out, IMO, fantastic from an aesthetic POV.

Note that instead of having an additional piece inside the box to support a woofer rebate, we surface mounted the woofer and later added an additional layer of 12mm to facilitate the rebate. Turns out this was a good thing, with the energy generated by the SDX7 the stethescope turned up more cabinet ringing than we like with just the 12mm walls. The extra layer also allows a larger bevel on the front.

dave

same caveat on these plans
Attached Files
File Type: pdf tysen-trapezoid-0v8.pdf (47.8 KB, 1041 views)
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 14th May 2009, 08:27 AM   #7
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Blog Entries: 5
Default Tysen as an example

Tysen should be considered as an instance of a whole family of designs.

With the large number of small FRs now available, and a wealth of midbass drivers (most often seen in the ubiquitous midbass+dome tweeter 2-way) there is a large selection of components suitable for systems with a small FR coupled with a helper bass unit.

Tysen has inspired development of an FF85/SilverFlute W14 MTM. We cjhose this combo as it will allow a passive XO. We also have drivers to do silimar with the Alpair 5 & 6.

I bet a lot of you have bits laying around just looking for a project. I can dig out 4 different TB 3" (one set to be used with a pair of vinatge Coral 8" woofers/side), some Jordan J6T, and a set of FE83A (and that is nor considering larger mid-tweeters -- come to think of it Fonken + FonkenWoof falls into this). Some OEM Vifa P17 (for PSB), a set of Jordan JX150, some Foster 12s that are good well up above 1k... & i know i can find more...

I still have more to post, and i'm sure there are questions to be answered, but i've got to go put some gloss on some FE167eN before i go to bed.

dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 14th May 2009, 04:58 PM   #8
chrisb is offline chrisb  Canada
diyAudio Member
 
Join Date: Aug 2002
Location: victoria BC
A couple of quick builder's notes-

With careful sizing of the rebated woofer cut-outs, you can get a very tidy friction fit of metal grilles. In our case from surplus recycled Monsoon computer speaker sub woofer boxes, but probably any number of car stereo installers would have spares that could fit.

The slanted version will definitely need some type of extended base plinth - stone or corian would be great
__________________
now on sabbatical
  Reply With Quote
Old 14th May 2009, 05:32 PM   #9
diyAudio Member
 
HareBrained's Avatar
 
Join Date: Mar 2009
Thanks for the detailed write-up. I love the concept and look forward to the permutations.
  Reply With Quote
Old 14th May 2009, 07:03 PM   #10
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Blog Entries: 5
Default midTL

The goal of the midTL is to attempt to absorb as much of the backwave as possible and to flatten the impedance curve. As can be seen by the attached impedance curve, i have mostly achieved that. The red curve is the FF85KeN in free-air, the blue curve in the Tysen midTL. If you imagine the blue curve as a typical double humped vented box curve, you can see that the minima is at about the Fs of 130 Hz, and that the lower hump is almost completely gone, and we have only a small resisdual of the lower hump.

This also shows why a passive XO can be difficult, but certainly not as difficult as the free-air curve.

If i ever get those Tysen back i'll measure the woofer impedance (JesseG borrowed them, took them up to Alert Bay with the "threat" that i may never see them again )

dave
Attached Images
File Type: gif tysen-vrs-freeair-ff85-imp.gif (14.1 KB, 7122 views)
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
300B Set amp some variations MartinV56 Tubes / Valves 0 12th February 2008 10:22 PM
How fast are 'Fast Fuse' and how to identify? bigpanda Solid State 7 22nd March 2005 10:00 PM
Zen Variations 5 Nelson Pass Pass Labs 66 5th August 2003 05:57 PM
Zen & Zen Variations-Part.2 billy Pass Labs 1 7th August 2002 07:24 PM
Zen Variations 3 - Questions vpharris Pass Labs 0 22nd May 2002 08:08 PM


New To Site? Need Help?

All times are GMT. The time now is 12:10 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2