DIY design for the Visaton FRWS 5?

[Havoc]

Does anyone knows of a design with the Visaton FRWS 5 that could be used as a computer speaker? I would like to make a small pc speaker for use at the office so it has to be:
- cheap in case it falls off the desk
- only needs to play very softly as I don't think it will be tolerated at normal volumes
- small as my desk is already overflowing

I could use some of those plastic pc speakers but were is the fun in that? Something that looks a bit out of the ordinary or plain weird would be more suitable.

 

[Henkjan]

just for fun I once designed a TL which had 3 of these in, 1 as midhigh, the other 2 as low. never heard if the guy actually built them...

An externally hosted image should be here but it was not working when we last tested it.

sizes see the attachment

the middle one in a 75cc enclosure, and gets a HP filter of 27uF (or 33uF) (reverse polarity), the other 2 mounted in series with a LP of 2.2mH and 47uF

but it can also be single driver of course:

An externally hosted image should be here but it was not working when we last tested it.

this one actually was built depth of the cab half of the other one

An externally hosted image should be here but it was not working when we last tested it.

edit: I see you're from Belgium, so you might be able to read the original threads on these two
http://forum.zelfbouwaudio.nl/viewtopic.php?t=7204
http://www.zelfbouwaudio.nl/forum/viewtopic.php?t=6749

 

[Havoc]

Thanks! That's the kind of idea I was thinking about. About the size of a pc screen so they'll fit nicely next to it. And simple enough as well. I think I'm going for the one with 3 speakers, but replace the middle one with a Visaton SC4ND.