Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

where do you route the cables in a Sachiko?
where do you route the cables in a Sachiko?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 1st March 2009, 01:06 AM   #1
marc rosen is offline marc rosen  United States
diyAudio Member
Join Date: Dec 2008
Default where do you route the cables in a Sachiko?

Hey All,
(Discalimer; I am no audiophile and do not pretend to be. I am a fairly decent woodworker and that is where I fit in with this Sachiko project.)
I am approaching the glue up stage on a set of Sachikos I am building for a friend. The boxes are built to the specs on the Spawn Family page. I am ready to mount the jacks for the cable hookups and do not know the best loaction for them, and also how far and where I should route the internal cables. These paired cables (Zu Wax model) are each about 1/4 inch diameter, clad with a mesh sheathing which I assume is for RF shielding. They are 96 inches long and will be soldered to the lugs of the jacks. I am going to mount the jacks in a Cocobolo plate which will be fitted into the Cherry plywood back panel. It looks like I will have sufficient cable to place the jacks near the distal ends of the last baffle (part G for those familiar with the plans).
How much "slack" should I allow and is it better to have the cables snake up from below or should they come from the top? Do I need to do anything to prevent vibration against the internal elemnts of the horns?
Any advice, and all suggestions are welcome. Thanks in advance,
  Reply With Quote


where do you route the cables in a Sachiko?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A more direct route brucegseidner Multi-Way 12 21st July 2009 06:42 AM
Route 66 USA TomWaits Everything Else 16 7th June 2007 08:01 PM
PG Route 66 problem Bertje Car Audio 8 11th February 2007 05:16 AM

New To Site? Need Help?

All times are GMT. The time now is 05:18 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio