Coral Flat 8 cabinet recommendation - Page 2

GM · 28th February 2009, 06:10 PM

Greets!

You're welcome!

To me, this sounds like you want free help with a potential commercial design which folks around here get ripped off enough already, so pardon my lack of interest if true. Regardless, sorry, but for a variety of reasons I'm forced to severely scale back my off-line one-on-one help to just existing friends.

Good luck with the project!

GM

JC951t · 1st March 2009, 12:43 AM

Hi Gm,
So sorry to misguide you. Yes indeed I need guidance
because of my lag of knowledge to speaker building.
I'm in project management & audio is just a hobby.
You seem like an open minded person & I thought
it would be nice if someone could listen to my thoughts
& advice me on the do's & don'ts & most importantly
without being criticize or laugh at.

Thank you again

Scottmoose · 1st March 2009, 08:16 AM

So ask here. Why do you assume people will laugh at you? You've just got a bunch of advice & links, and now you assume you'll be attacked?

JC951t · 1st March 2009, 10:27 AM

Hi Scott,
Thanks for the reply. How to ask ? As you said in post #4.
the specs I have may or maybe not be accurate.
From GM's post, it seems that he's got experience
with the corals & that's why I'm seeking for his advice
& guidance. O.K to spill the beans, I'm looking to build
an Omni fullrange speaker. Which means that the driver
would have to be mounted on top of the cabinet. After
studying the your BVR's & Folded TQWT enclosures, they
all seem to be very tall & I'm looking at how to achieve
a decent bass output without having to build a tall enclosure.
Maybe a TL with more foldings will do the job but had listen to
some PMC speakers before & they sounded slow in the bass.

28th February 2009, 06:10 PM	#11
GM diyAudio Member Join Date: Jun 2003 Location: Chamblee, Ga.	Greets! You're welcome! To me, this sounds like you want free help with a potential commercial design which folks around here get ripped off enough already, so pardon my lack of interest if true. Regardless, sorry, but for a variety of reasons I'm forced to severely scale back my off-line one-on-one help to just existing friends. Good luck with the project! GM __________________ Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coral Flat 5 t/s	ballsingtripp	Full Range	17	15th November 2009 08:46 AM
Coral Flat 6B's. 2 pairs.	nodiak	Swap Meet	1	11th March 2008 08:47 PM
Coral Flat 10	albertli	Full Range	16	3rd August 2006 03:07 PM
FS: Coral Flat 6B drivers	harryz	Swap Meet	0	2nd August 2006 08:16 AM
Coral Flat 6 question.	steenoe	Full Range	4	29th June 2005 02:58 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st March 2009, 12:43 AM	#12
JC951t diyAudio Member Join Date: Sep 2006	Hi Gm, So sorry to misguide you. Yes indeed I need guidance because of my lag of knowledge to speaker building. I'm in project management & audio is just a hobby. You seem like an open minded person & I thought it would be nice if someone could listen to my thoughts & advice me on the do's & don'ts & most importantly without being criticize or laugh at. Thank you again

1st March 2009, 08:16 AM	#13
Scottmoose diyAudio Member Join Date: Mar 2005 Location: UK	So ask here. Why do you assume people will laugh at you? You've just got a bunch of advice & links, and now you assume you'll be attacked?

1st March 2009, 10:27 AM	#14
JC951t diyAudio Member Join Date: Sep 2006	Hi Scott, Thanks for the reply. How to ask ? As you said in post #4. the specs I have may or maybe not be accurate. From GM's post, it seems that he's got experience with the corals & that's why I'm seeking for his advice & guidance. O.K to spill the beans, I'm looking to build an Omni fullrange speaker. Which means that the driver would have to be mounted on top of the cabinet. After studying the your BVR's & Folded TQWT enclosures, they all seem to be very tall & I'm looking at how to achieve a decent bass output without having to build a tall enclosure. Maybe a TL with more foldings will do the job but had listen to some PMC speakers before & they sounded slow in the bass.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)