horn with tb w3-832

morpheus82 · 29th January 2009, 04:20 PM

hi guys,
i've found these on ebay:
http://cgi.ebay.it/Tang-Band-W3-832S...742.m153.l1262
specifications seems to be very nice...
i'd like to build a horn loudspeaker with these, what do you think?
but i need some help from people who like to deal with horns...do you have any formula?or software?or idea?
thanx a lot in advance!

e_fortier · 30th January 2009, 02:59 AM

Hi,

The QTS seems a bit too high for horns, probably better with vented box. Let me know if you find a good application I have 4 of them sitting at home.

Eric

morpheus82 · 30th January 2009, 03:11 PM

hi mate, i'm not so practical with horns...so, you think is not made for this loading?will it sound bad in this case?

901Fixer · 30th January 2009, 03:16 PM

How do these drivers compare to other Tang Band W3 like say the W3-1364 or W3-926 ? Would either of these two be better suited to a horn? Which would be better for OB or use in a car dash or door ? None of the three are very expensive. The 1364 has the Bamboo/Paper cone.

morpheus82 · 30th January 2009, 03:18 PM

i don't know exactly...i've seen these very cheap on ebay and i thought to realise a cheap horn as pc speakers...
frequency response is very nice imho...

29th January 2009, 04:20 PM	#1
morpheus82 diyAudio Member Join Date: Oct 2004	horn with tb w3-832 hi guys, i've found these on ebay: http://cgi.ebay.it/Tang-Band-W3-832S...742.m153.l1262 specifications seems to be very nice... i'd like to build a horn loudspeaker with these, what do you think? but i need some help from people who like to deal with horns...do you have any formula?or software?or idea? thanx a lot in advance!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Horn experts - Please help to determine optimal throat size for low-mid horn	pk	Multi-Way	7	21st March 2010 06:31 PM
Single Driver Horn Base Port from Frugal Horn	EmergencyDpt	Swap Meet	0	26th October 2008 02:24 AM
RCA MI-1425 with MI-1469 Horn, MI-1457 (W-horn) with RCA MI-? fieldcoil woofer	thekop-bkk	Swap Meet	0	26th September 2008 04:55 AM
looking for 6.5inch woofers suitable for a 30 - 35Hz horn... and a small horn too :P	SkinnyBoy	Multi-Way	24	13th February 2004 06:06 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th January 2009, 02:59 AM	#2
e_fortier diyAudio Member Join Date: May 2001 Location: Montreal	Hi, The QTS seems a bit too high for horns, probably better with vented box. Let me know if you find a good application I have 4 of them sitting at home. Eric

30th January 2009, 03:11 PM	#3
morpheus82 diyAudio Member Join Date: Oct 2004	hi mate, i'm not so practical with horns...so, you think is not made for this loading?will it sound bad in this case?

30th January 2009, 03:16 PM	#4
901Fixer diyAudio Member Join Date: Dec 2008 Location: Knoxville, TN	How do these drivers compare to other Tang Band W3 like say the W3-1364 or W3-926 ? Would either of these two be better suited to a horn? Which would be better for OB or use in a car dash or door ? None of the three are very expensive. The 1364 has the Bamboo/Paper cone.

30th January 2009, 03:18 PM	#5
morpheus82 diyAudio Member Join Date: Oct 2004	i don't know exactly...i've seen these very cheap on ebay and i thought to realise a cheap horn as pc speakers... frequency response is very nice imho...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)