Driver Cut Out DXFs

st_eloi · 12th May 2008, 08:29 PM

Hello,

I just began building my mFonkers out of solid oak, and I need to make a DXF file for the CNC router, to mill the driver cut out.

It occurred to me that someone here might already have a file I could use. If you can help me out, drop me an email:

davidblairross at gmail dot com

Thanks for your help, I think I will post some photos of my progress pretty soon.

David

planet10 · 12th May 2008, 10:40 PM

We certainly have the data in the CNC, but i don't know if it was ever a DXF file... Chris?

dave

Theli · 13th May 2008, 12:03 AM

most CNC router should be able to read g-code..no? Just an idea.

tilroh · 13th May 2008, 12:54 AM

I wish it were possible to sell a "one time use only" DFX file for speaker enclosures.

chrisb · 13th May 2008, 04:52 PM

Quote:

Originally posted by planet10
We certainly have the data in the CNC, but i don't know if it was ever a DXF file... Chris?

dave

Could be, but not in this case - these ones were written at the machine by the operator, using the console's program language

As it happens, this machine (Morbidelli 600KL) is of Italian manufacture, (oh my yes, this makes service and parts acquisition tonnes of fun) and the programs can originate from either of 2 CAD sources - DXF files or Drillmate (for custom parametric patterns), which are then converted to native machine code by ASPAN, then transfered on the network.

st_eloi · 13th May 2008, 06:32 PM

Looks like I will just have to try and draw the strange shapes myself. Thanks for the info though, I predict lots of tests in the near future.

12th May 2008, 08:29 PM	#1
st_eloi diyAudio Member Join Date: Apr 2008	Driver Cut Out DXFs Hello, I just began building my mFonkers out of solid oak, and I need to make a DXF file for the CNC router, to mill the driver cut out. It occurred to me that someone here might already have a file I could use. If you can help me out, drop me an email: davidblairross at gmail dot com Thanks for your help, I think I will post some photos of my progress pretty soon. David

12th May 2008, 10:40 PM	#2
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 5	We certainly have the data in the CNC, but i don't know if it was ever a DXF file... Chris? dave __________________ community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
L-pad attenuator for midrange driver 6 1/4 inch driver	rhythmdiy	Multi-Way	0	4th November 2007 03:32 PM
Base driver to suit ESS Heil driver	gerado	Planars & Exotics	6	1st August 2007 07:56 PM
FS: Silver Iris Coaxial 15" driver pair (sans XO and compression driver)	theAnonymous1	Swap Meet	0	24th April 2007 12:09 AM
Driver/ driver configuration improve soundstage width	andy2	Multi-Way	6	16th June 2005 08:47 PM
mtm versus tm driver recommendations on project with $500 driver and xo part limit	gsattler	Multi-Way	4	20th May 2002 05:54 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th May 2008, 12:03 AM	#3
Theli diyAudio Member Join Date: Jan 2004 Location: Saskatoon	most CNC router should be able to read g-code..no? Just an idea.

13th May 2008, 12:54 AM	#4
tilroh diyAudio Member Join Date: Mar 2008	I wish it were possible to sell a "one time use only" DFX file for speaker enclosures.

13th May 2008, 06:32 PM	#6
st_eloi diyAudio Member Join Date: Apr 2008	Looks like I will just have to try and draw the strange shapes myself. Thanks for the info though, I predict lots of tests in the near future.