Mini Fulltone

KMMM · 10th April 2008, 12:06 PM

Hi

I'm planning to build a pair of small full tone speakers. 3"- 4" drivers.
I've been looking at a few - Like the MicroFonken and the HiVi B3S in mini transmission-line

The plan is to drive them with the Charlize 2 http://diyparadise.com/charlize2.html

Would this amp be sufficient to drive these speakers?
Is there a correction circuit used with this designs?
Or are there other designs better suited for this?

I'm quite new to DIY. The woodworking is no problem, but the rest - math and physics,
is not my forse...

Could any one help?

Best regards

DocLorren · 10th April 2008, 02:16 PM

I would say the Charlize and all other TA2020/TA2024 Tripath based amps are a bit underpowered to drive the HiVi's properly.
Better look at the LM1875 or LM3875 Gainclones.
The HiVi B3S in the MLTL is fun to build and to play with. Sounds pretty good too (although the simulations are frightening).

danielwritesbac · 14th April 2008, 09:33 AM

Try these references:

http://www.partsexpress.com/projects...?project=3CRTi
http://www.partsexpress.com/pe/pshow...number=264-848

10th April 2008, 12:06 PM	#1
KMMM diyAudio Member Join Date: Oct 2007	Mini Fulltone Hi I'm planning to build a pair of small full tone speakers. 3"- 4" drivers. I've been looking at a few - Like the MicroFonken and the HiVi B3S in mini transmission-line The plan is to drive them with the Charlize 2 http://diyparadise.com/charlize2.html Would this amp be sufficient to drive these speakers? Is there a correction circuit used with this designs? Or are there other designs better suited for this? I'm quite new to DIY. The woodworking is no problem, but the rest - math and physics, is not my forse... Could any one help? Best regards

14th April 2008, 09:33 AM	#3
danielwritesbac diyAudio Member Join Date: Nov 2007	Try these references: http://www.partsexpress.com/projects...?project=3CRTi http://www.partsexpress.com/pe/pshow...number=264-848 __________________ ClipNipper--trim the clipping not the audio.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
the Very Mini Magico Mini	zei	Multi-Way	7	11th February 2008 08:10 PM
Mini-A to a Mini-F2?	winslow	Pass Labs	7	13th August 2005 09:57 PM
My new mini-A. I really like it!	mpmarino	Pass Labs	20	3rd August 2005 02:37 AM
Mini-2	MikeW	Pass Labs	28	29th February 2004 09:14 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th April 2008, 02:16 PM	#2
DocLorren diyAudio Member Join Date: Nov 2004 Location: Utrecht	I would say the Charlize and all other TA2020/TA2024 Tripath based amps are a bit underpowered to drive the HiVi's properly. Better look at the LM1875 or LM3875 Gainclones. The HiVi B3S in the MLTL is fun to build and to play with. Sounds pretty good too (although the simulations are frightening).

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)