Driver selection to match bass horn

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
L

Lars Timm

Member
Joined 2007
I'm considering making a pair of these for my living room which is pretty large (50 m2):

http://billfitzmaurice.com/David.html

The low end is handled by a horn loaded long-throw 8 inch with a sensitivity of 95dB/2.83v/1 meter. It needs to be crossed over at around 150 Hz

I would like to substitute the MTM section with a fullrange driver, but don't know what to use.
The box it will be mounted in is around 11 liters (sealed).
Is there any fullrange driver that can keep up with the woofer section an be used in a large room?

Thanks
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom