Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Why angular frequencies in Leach's calculations ?
Why angular frequencies in Leach's calculations ?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 13th September 2007, 05:25 AM   #1
lowtherdream is offline lowtherdream  Canada
diyAudio Member
 
lowtherdream's Avatar
 
Join Date: Apr 2007
Location: Montreal, Quebec, Canada
Default Why angular frequencies in Leach's calculations ?

I have been reading Dr. Leach's paper and have difficulty with the concept of angular cutoff frequency.

Why do we have to use the angular cutoff frequency and what will be the effect in the final design ?
In most of the other formulas, I have been using the cutoff frequencies, Fl, Fh, Fc.

If I undestand properly, Leach suggest we have to use 2πFl, 2πFh, 2πFc to calculate the horn parameters.
Does this apply only to folded horns ? Are there times where we should use less then 360 degrees ?
  Reply With Quote
Old 13th September 2007, 05:44 AM   #2
planet10 is offline planet10  Canada
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Why angular frequencies in Leach's calculations ?
angular frequency = 2 pi f

it is used because it makes the equations easier to manipulate.

dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 13th September 2007, 08:15 AM   #3
Scottmoose is offline Scottmoose  United Kingdom
diyAudio Member
 
Scottmoose's Avatar
 
Join Date: Mar 2005
Location: UK
It's also worth pointing out that Leach's math works on a few assumptions, one of which is maximum efficiency (or as close as you can reasonably get) is the principle goal / desire. No folds are assumed in his equations, which are really aimed at 'proper' horns (i.e. front loaded) though they're frighteningly effective for BLHs as well.
__________________
"'That'll do", comes the cry of the perfectionist down the ages.' James May -The Reassembler
www.wodendesign.com Community sites www.frugal-horn.com http://frugal-phile.com/
  Reply With Quote
Old 17th September 2007, 10:51 PM   #4
lowtherdream is offline lowtherdream  Canada
diyAudio Member
 
lowtherdream's Avatar
 
Join Date: Apr 2007
Location: Montreal, Quebec, Canada
It still does not explain why we use the angular frequency.
There is rotation in this equation and I do not understand where the movement of the membrane is tranfered in a rotational movement, unless this movement refers to the omnidirectional movement of a sound wave.

Maybe I should read more about acoustics to better understand these priciples. Any good web references to help me understand ?
  Reply With Quote
Old 18th September 2007, 05:38 AM   #5
planet10 is offline planet10  Canada
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Why angular frequencies in Leach's calculations ?
Quote:
Originally posted by lowtherdream
It still does not explain why we use the angular frequency.
It is all about the math. The change from cartesian co-ordinates makes any math with sines/cosines MUCH easier to manipulate.

dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote

Reply


Why angular frequencies in Leach's calculations ?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
double horn, bib or angular spiral horn? testarossa2k Full Range 53 16th August 2017 07:19 PM
High Current Leach/leach super amp bowdown Solid State 41 2nd March 2011 02:15 PM
Hemp Acoustics FR8C in Angular Spiral Enclosure cjctan Full Range 45 2nd June 2009 04:32 PM
Help with Angular Spiral yan6 Full Range 19 10th February 2009 11:31 AM
Frequencies for EQ? Lisandro_P Solid State 5 12th November 2001 07:16 AM


New To Site? Need Help?

All times are GMT. The time now is 05:55 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki