need tips for monacor sp200x

[tyor]

HI
I have a pair of sp200x http://monacor.no/hoyttalerelementer...lltone/sp200x/
Now in a folded voigt pipe. The sound is ok but I want try somthing new with them.

So What should I try?

[Svein_B]

I have seen sp200x suggested for open baffle (as a lower price alternative to the Visaton B200), but Qts=0,52 might be on the low side for OB.

Why not tell us what you would like to improve, and a photo or plans of the existing cabinets. If the cabinets are worth keeping, it may be possible to modify the cabinet to some TQWT or TL alignment.

SveinB.

[hpolkerman]

Hello,

I've got four of them and there are several options:

BR - from 50 Liter till a 100 (more liter the beter, I'm thinking of 70Liter would be nice)

TQWT (Tampered line) If you need the scetches I've got some images from an old forum that isn't around anymore. They should sound great with a deep bass and aren't as big as the 100Liter BR's...

Double BR (As the Visaton Solo 50 and 100)

Open baffle, not my favourite tried it once...

Horn, haven't tried it yet.


In short I'm going to build the BR-70Liter with them and a TQWT just for fun... But first I'm going to finish some old projects I've got lying around.

The SP-200x needs notchfilters, you'd best should use 1.5Mh, 2x22Ohm 10Watt, 2.2uF in parallel of each other in a serie on the SP200x.

In addition a supertweeter would be a good idea to get some high out of the speaker... with a 8.2Ohm resistor in parallel and a 1.5uF 400Vdc in series of the tweeter.

Hope this helps, Gr. Henri

[tyor]

I want to have a little more bass if possible. vil give you a drawing of the cabinets later today. But the cabinets are not worth keeping. they are awfull

[Leglandu]

Hi,

Here is a TQWT drawing, from a french forum :

http://www.cinetson.org/phpBB2/viewtopic.php?t=8512

Note they add a SPM-90, glued at the back of the driver, to increase the HF :

http://www.monacor.com/int/en/produk...pr=EN&typ=full

To be glued as opposite field, preferably whith a 3 mm spacer...

[Leglandu]

Another way, "Quasi.Mo.D.O" :

http://melhuish.org/audio/DIYBX8.html

[tyor]

Originally posted by Leglandu
Hi,

Here is a TQWT drawing, from a french forum :

http://www.cinetson.org/phpBB2/viewtopic.php?t=8512

Note they add a SPM-90, glued at the back of the driver, to increase the HF :

http://www.monacor.com/int/en/produk...pr=EN&typ=full

To be glued as opposite field, preferably whith a 3 mm spacer...

Hmmm That TQWT looks like the speakers I have. I thought it was a folded voigt pipe



But I dont have that filter and I have to look at my draving about the size of the cabinet.

[tyor]

I have desided to try some kind of rear loaded hor. Any sugestin of what kind and size that will fit to this driver

[Leglandu]

If you can afford big dimensions, the BIB is just for you :

http://www.zillaspeak.com/bib-howtobuild.asp

http://www.zillaspeak.com/bib-pics.asp

http://www.zillaspeak.com/BIB-Monacor.asp

It will be about 178 x 42 x 29 cm external...

The original is there :

http://melhuish.org/audio/DIYTQ8.html

And THE dedicated huge thread to get more infos/help :

Terry Cain's BIB -why does it work and does anyone have those Fostex Craft Handbooks?

[tyor]

veryy intresting. and easy to bild. The cabinets I have look like this http://melhuish.org/audio/DIYTQ3.html

And They are 100cm high. 20cm width and 40cm deep.

If I build BIB with sp200x. Should I use some kind of filter?