Frequency Cutoff

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
H

habsrock93

Member
Joined 2006
I'm a diy speaker virgin, but i'v decided to take the plunge with GM's MLTL-31. Working with the formual Capacitance = 159155/ frequency/resistance, with my current setup, i'll have about a 40hz cutoff ( .22uf coupling cap into charlize - 20kohm load - ). Would there be any advantage to having a lower cutoff point? (hopefully not, because then i'd have to buy new coupling caps :)

Thanks

Dave
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom