BoxSim definition files for Jordan drivers

kubi · 20th July 2007, 09:10 PM

Hi there!

Does anybody have by any chance driver definition files for BoxSim for Jordans' JX125 and JXR6 HD? I have those drives on the shelf for a long time and now it may be time to find a use for them.

Thanks in advance!

richie00boy · 20th July 2007, 09:44 PM

What do the definition files consist of? Surely it's just Thiele-Small parameters, which are published on the Jordan website.

Juergen Knoop · 20th July 2007, 11:31 PM

maybe this helps:
http://www.visaton.de/vb/showthread....threadid=15370
according to the thread, Boxsim is sponsored by Visaton and intentionally limited to Visaton chassis.
regards

Colin · 21st July 2007, 09:15 AM

Not sure what Boxsim files are but the JX125 has fairly standard parameters so any usual simulation software should handle it okay from the TS parameters.

The JX6HD is a little more unusual and Jordan strongly recommend using the closed box suggestions on their website. The driver doesn't have a conventional suspension so relies on the closed box to protect it at LF.

Juergen Knoop · 21st July 2007, 10:23 AM

BoxSim simulates the whole frequency range and depends on TSP and measured frequency response as well.
regards

kubi · 21st July 2007, 01:27 PM

BoxSim comes with Visaton drivers data, but it possible to import any other driver if you are able to do the measurements and so write the files.
My current problem is the baffle step which I try to compensate within the software first before building the first prototype. By crossing somewhere around 400 or 500Hz, the problems will occur for the JX6HD only.

20th July 2007, 09:10 PM	#1
kubi diyAudio Member Join Date: Aug 2004 Location: Germany	BoxSim definition files for Jordan drivers Hi there! Does anybody have by any chance driver definition files for BoxSim for Jordans' JX125 and JXR6 HD? I have those drives on the shelf for a long time and now it may be time to find a use for them. Thanks in advance!

20th July 2007, 09:44 PM	#2
richie00boy Did it Himself diyAudio Member Join Date: Nov 2003 Location: Gloucestershire, England, UK	What do the definition files consist of? Surely it's just Thiele-Small parameters, which are published on the Jordan website. __________________ www.readresearch.co.uk my website for UK diy audio people - designs, PCBs, kits and more

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
where can I get FRD files of my drivers?	piro	Multi-Way	7	20th August 2009 12:05 PM
Looking for .frd and .zma files for Seas Excel drivers	JohanH	Multi-Way	0	5th April 2005 09:52 AM
FRD & ZMA Files for Focal Drivers? (Speaker Workshop)	mark.carline	Multi-Way	3	22nd April 2004 04:06 AM
FRD & ZMA Files for Focal Drivers? (Speaker Workshop)	mark.carline	Instruments and Amps	0	21st April 2004 10:21 AM
Where to buy Jordan drivers?	Michael Rothacher	Multi-Way	12	24th July 2003 05:27 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th July 2007, 11:31 PM	#3
Juergen Knoop diyAudio Member Join Date: Jan 2007 Blog Entries: 3	maybe this helps: http://www.visaton.de/vb/showthread....threadid=15370 according to the thread, Boxsim is sponsored by Visaton and intentionally limited to Visaton chassis. regards

21st July 2007, 09:15 AM	#4
Colin diyAudio Member Join Date: Aug 2003	Not sure what Boxsim files are but the JX125 has fairly standard parameters so any usual simulation software should handle it okay from the TS parameters. The JX6HD is a little more unusual and Jordan strongly recommend using the closed box suggestions on their website. The driver doesn't have a conventional suspension so relies on the closed box to protect it at LF.

21st July 2007, 10:23 AM	#5
Juergen Knoop diyAudio Member Join Date: Jan 2007 Blog Entries: 3	BoxSim simulates the whole frequency range and depends on TSP and measured frequency response as well. regards

21st July 2007, 01:27 PM	#6
kubi diyAudio Member Join Date: Aug 2004 Location: Germany	BoxSim comes with Visaton drivers data, but it possible to import any other driver if you are able to do the measurements and so write the files. My current problem is the baffle step which I try to compensate within the software first before building the first prototype. By crossing somewhere around 400 or 500Hz, the problems will occur for the JX6HD only.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)