diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Full Range (http://www.diyaudio.com/forums/full-range/)
-   -   Enclosure for Richard Allan Drivers (http://www.diyaudio.com/forums/full-range/104462-enclosure-richard-allan-drivers.html)

enzedone 1st July 2007 02:40 AM

Enclosure for Richard Allan Drivers
 
2 Attachment(s)
O.k here are the specs

CG10 Richard Allan

Fs....................58
Qms................3.58
Qes.................0.63
Qt....................0.536
VAS(cu ft)........2.63
No (%)............2.2
Cms (M/N).......5.34
Mms (gms)......14.11
BI (Wb/M)........7.8

I took these out of some really old cabinets that were history.

I do not have the knowledge to or the abiltiy to design a set of cabinets for these.
The miss's is quite good, but I couldn't go over about 1800mm high, if they are nice and thin as opposed to short and wide, which I don't like anyway.
I will be using these for easy listening, vocals, jazz, accoutic....
But in saying that, I would still like to extract as much bass out of these as I could within the limitations that I have set for size of course.
I am also limited to what I can build by the tools I have. I don't have a router or a bench saw, or any other high tech gear. But I have built a pair of speakers based on the fostex FE127 which turned out ok. Just dont want anything too complicated.

Any thoughts or ideas would be greatfully appreciated

Brett

enzedone 1st July 2007 02:43 AM

Old cabinets
 
2 Attachment(s)
Here's a pic of the old cabinets sitting next to the FE127 cabinets

They are just too wide for my liking, so would like something a little thinner.

Brett


All times are GMT. The time now is 12:06 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2