tone tubby 8"

sumacSK · 29th May 2007, 06:17 AM

Hi,

On tone tubby website there is a new 8" driver with specs: http://www.tonetubby.com/JJC8GL-8A_3-29-07.xls Not quite fullrange, but what do guys think about this driver? 8 Ohm version seems like a nice middbas driver. Could be good crossed around 2K to some nice ribbon - maybe NEO3 or Fountek NeoCd2.0 .
What do you think??

Martin

GM · 30th May 2007, 04:26 AM

Greets!

I'm not into XOs around our peak hearing point, so notching the HF ~flat and making a little 90 deg WG for the ribbon to mate to the 8"er's ~3200 Hz 90 deg point makes more sense to me. That, or double up some small ribbons to allow a ~1600 Hz XO where the driver's just beginning to beam.

GM

Scottmoose · 30th May 2007, 09:14 AM

Sounds like a good plan to me. And those TT drivers with the Harrison cone are starting to look very impressive.

29th May 2007, 06:17 AM	#1
sumacSK diyAudio Member Join Date: Jun 2004 Location: Prague	tone tubby 8" Hi, On tone tubby website there is a new 8" driver with specs: http://www.tonetubby.com/JJC8GL-8A_3-29-07.xls Not quite fullrange, but what do guys think about this driver? 8 Ohm version seems like a nice middbas driver. Could be good crossed around 2K to some nice ribbon - maybe NEO3 or Fountek NeoCd2.0 . What do you think?? Martin

30th May 2007, 04:26 AM	#2
GM diyAudio Member Join Date: Jun 2003 Location: Chamblee, Ga.	Greets! I'm not into XOs around our peak hearing point, so notching the HF ~flat and making a little 90 deg WG for the ribbon to mate to the 8"er's ~3200 Hz 90 deg point makes more sense to me. That, or double up some small ribbons to allow a ~1600 Hz XO where the driver's just beginning to beam. GM __________________ Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JX92s, tone tubby alnico 12" 8 ohms. for sale	britbug	Swap Meet	1	25th October 2011 07:58 PM
Help to choose between Alerion & Pma6 Ob with "Tone Tubby" AlNiCo	HPH	Full Range	1	27th July 2009 08:34 PM
Tone Tubby Alnico 12	DUC985	Full Range	40	6th July 2009 09:57 PM
Filling the gap -- Tone Tubby ?	Sjef	Multi-Way	8	18th July 2008 03:06 AM
Anyone try the 8" Tone Tubby?	Caferacer	Full Range	0	12th December 2007 02:53 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th May 2007, 09:14 AM	#3
Scottmoose diyAudio Member Join Date: Mar 2005 Location: UK	Sounds like a good plan to me. And those TT drivers with the Harrison cone are starting to look very impressive.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)