Impulse H6 replacement driver

Haavard · 30th April 2007, 10:11 PM

I have the cabinet plans for the Impulse H6 speakers. Impulse is no longer on the marked, but they made some fantastic hornconstrutions. I'm now planning to build the H6. The problem is to find a replament driver. The original driver is SEAS CA17RCY, this driver is no longer possible to get, as far as I know.
I wonder, will SEAS CB17RCY/P be a good replacement.

Thank you

Håvard

Tyimo · 1st May 2007, 05:33 AM

Hi Håvard!

We built the H6 with the Vifa C17WG69-08. It works very well!

Have you got any info about the H2???

Greets:

Tyimo

Haavard · 1st May 2007, 08:34 AM

Thanks a lot for the info.
Have not get any information about the H2.

Planning to do some cabinetwork this summer. Have had a pair of speakers with the Seas CB17 unit, and this is a very fine loudspeaker.

Håvard

Colin · 1st May 2007, 01:49 PM

There's a lot of rebuild info on the H6 here. You may already have come across that.

Where did you obtain the H6 plans?

Haavard · 2nd May 2007, 11:29 AM

I don't know if I can tell you where I got the cabinetplans.
I'll check it out.

Håvard

martin clark · 2nd May 2007, 11:45 AM

I measured my old pair ( - with all the errors that risks!) for Håvard who asked for confirmation of a principle.

I will not be posting the sketch generally because the design (however simple) is not my property.

Haavard · 2nd May 2007, 02:17 PM

Quote:

Originally posted by martin clark
I measured my old pair ( - with all the errors that risks!) for Håvard who asked for confirmation of a principle.

I will not be posting the sketch generally because the design (however simple) is not my property.

Martin

Do you have any opinion about the Seas CB17RCY/P driver?

Håvard

Tyimo · 2nd May 2007, 03:01 PM

Hi Martin!

Nice to see you here!

I sended you some e-mails about the H2 subject, but you didn't unswered yet. Did I hurt you with something??

Greets:

Tyimo

P.S.: I have the "Omni" H6........

martin clark · 2nd May 2007, 03:24 PM

Not at all Tyimo, I just haven't had any time to do the necessary; my apologies.

I'll email you soon

Tyimo · 2nd May 2007, 05:50 PM

Hi Martin!

No problem!

I am waiting your e-mail.

Greets:

Tyimo

30th April 2007, 10:11 PM	#1
Haavard diyAudio Member Join Date: Mar 2004 Location: Lena	Impulse H6 replacement driver I have the cabinet plans for the Impulse H6 speakers. Impulse is no longer on the marked, but they made some fantastic hornconstrutions. I'm now planning to build the H6. The problem is to find a replament driver. The original driver is SEAS CA17RCY, this driver is no longer possible to get, as far as I know. I wonder, will SEAS CB17RCY/P be a good replacement. Thank you Håvard

2nd May 2007, 03:01 PM	#8
Tyimo diyAudio Member Join Date: Nov 2002 Location: Hungary	question to Martin Hi Martin! Nice to see you here! I sended you some e-mails about the H2 subject, but you didn't unswered yet. Did I hurt you with something?? Greets: Tyimo P.S.: I have the "Omni" H6........

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with replacement sub driver	Hugh M	Subwoofers	1	11th March 2008 01:19 PM
Replacement driver for old REL Q50 sub	smallangryboy	Subwoofers	3	9th May 2006 03:37 AM
Replacement driver	Kittle	Multi-Way	1	7th March 2006 05:51 PM
Kls-9 driver replacement	dinamic1	Multi-Way	0	14th March 2002 10:35 AM
Driver replacement.	prash	Multi-Way	1	14th March 2002 03:37 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st May 2007, 05:33 AM	#2
Tyimo diyAudio Member Join Date: Nov 2002 Location: Hungary	Hi Håvard! We built the H6 with the Vifa C17WG69-08. It works very well! Have you got any info about the H2??? Greets: Tyimo

1st May 2007, 08:34 AM	#3
Haavard diyAudio Member Join Date: Mar 2004 Location: Lena	Thanks a lot for the info. Have not get any information about the H2. Planning to do some cabinetwork this summer. Have had a pair of speakers with the Seas CB17 unit, and this is a very fine loudspeaker. Håvard

1st May 2007, 01:49 PM	#4
Colin diyAudio Member Join Date: Aug 2003	There's a lot of rebuild info on the H6 here. You may already have come across that. Where did you obtain the H6 plans?

2nd May 2007, 11:29 AM	#5
Haavard diyAudio Member Join Date: Mar 2004 Location: Lena	I don't know if I can tell you where I got the cabinetplans. I'll check it out. Håvard

2nd May 2007, 11:45 AM	#6
martin clark diyAudio Member Join Date: Jul 2003 Location: Bath, UK	I measured my old pair ( - with all the errors that risks!) for Håvard who asked for confirmation of a principle. I will not be posting the sketch generally because the design (however simple) is not my property.

2nd May 2007, 03:24 PM	#9
martin clark diyAudio Member Join Date: Jul 2003 Location: Bath, UK	Not at all Tyimo, I just haven't had any time to do the necessary; my apologies. I'll email you soon

2nd May 2007, 05:50 PM	#10
Tyimo diyAudio Member Join Date: Nov 2002 Location: Hungary	Hi Martin! No problem! I am waiting your e-mail. Greets: Tyimo

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)