Fostex FX120

Jeroenkv · 30th April 2007, 11:36 AM

Hello,

I have put the Fostex FX120 out of the box in my prototype:

Crossover is around 300 hz. (The FX120 is open baffle and rolls of arround 300 hz).

I notice that the range > 3 khz has a lower volume than < 3 khz. Is this normal? Does it change when they are "burned" in during the first 100 hours?

Do you have suggestions for the FX120 (filters, configurations etc.)?

Regards,
Jeroen

tinitus · 30th April 2007, 01:11 PM

Nice speaker

It has been stated before that FX120 is a "polite" wideband, allthough too much for some its a good quality my book

I have never heard the FX120, but have always thought it would need a supertweeter

Jeroenkv · 30th April 2007, 01:19 PM

Just measured them again and they are improving!! (20 hours of play to this moment). There is still a 3db dip at 4 khz, but >6khz has improved considerably. Lets see what happens after the 100 hours of burning in.......

sumacSK · 2nd May 2007, 09:54 AM

Hi!

Nice speaker.. So how does it compares to your NEO8 setup?? Also how does this speaker deals with more complex stuf (dynamic..)

Thanks martin

30th April 2007, 11:36 AM	#1
Jeroenkv diyAudio Member Join Date: Jul 2005 Location: Uitgeest	Fostex FX120 Hello, I have put the Fostex FX120 out of the box in my prototype: Crossover is around 300 hz. (The FX120 is open baffle and rolls of arround 300 hz). I notice that the range > 3 khz has a lower volume than < 3 khz. Is this normal? Does it change when they are "burned" in during the first 100 hours? Do you have suggestions for the FX120 (filters, configurations etc.)? Regards, Jeroen

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fostex fx120 and PAWO	marchel	Full Range	3	18th March 2008 12:29 AM
Fostex FX120 : the second part...	youyoung21147	Full Range	13	8th July 2005 09:14 AM
fostex fx120 ... first impressions	punk	Full Range	1	23rd September 2004 06:54 PM
Fostex F120A vs FX120 or Alternatives	Dr. ODD	Multi-Way	22	15th June 2004 09:42 PM
fostex FX120 or FE108EZ ? ( was : need help fullrange project)	punk	Multi-Way	0	11th March 2003 12:43 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th April 2007, 01:11 PM	#2
tinitus diyAudio Moderator Join Date: Nov 2005	Nice speaker It has been stated before that FX120 is a "polite" wideband, allthough too much for some its a good quality my book I have never heard the FX120, but have always thought it would need a supertweeter

30th April 2007, 01:19 PM	#3
Jeroenkv diyAudio Member Join Date: Jul 2005 Location: Uitgeest	Just measured them again and they are improving!! (20 hours of play to this moment). There is still a 3db dip at 4 khz, but >6khz has improved considerably. Lets see what happens after the 100 hours of burning in.......

2nd May 2007, 09:54 AM	#4
sumacSK diyAudio Member Join Date: Jun 2004 Location: Prague	Hi! Nice speaker.. So how does it compares to your NEO8 setup?? Also how does this speaker deals with more complex stuf (dynamic..) Thanks martin

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)