Hi,
maybe you can help me.
Ive got an old Blaupunkt Tuner from ca 1980 on my hobby desk.
It's working perfectly except for one little flaw...
This mashine has a 7-segment style Tube Display, wich
indicates the frequency. All the elements are glowing permanently
so it displays "1888"
I have no experience with such diplays...
I suspect IC 602... Crystal is oscillating, operating voltages are OK.
Maybe you have some ideas?
Here the shematic:
http://www.pictureupload.de/pictures/100407112153_scan.jpg
greetings,
Stephan
maybe you can help me.
Ive got an old Blaupunkt Tuner from ca 1980 on my hobby desk.
It's working perfectly except for one little flaw...
This mashine has a 7-segment style Tube Display, wich
indicates the frequency. All the elements are glowing permanently
so it displays "1888"
I have no experience with such diplays...
I suspect IC 602... Crystal is oscillating, operating voltages are OK.
Maybe you have some ideas?
Here the shematic:
http://www.pictureupload.de/pictures/100407112153_scan.jpg
greetings,
Stephan
Hi,
I'm at greater Hamburg here, about 400km north.
Pretty long time ago, i was born in 1982.
I put the mashine back to duty, as it does a good job even without that display.
I found a german dealer who seems to have them, i'll call him next week, maybe i'm lucky.
greetings,
Stephan
it's labeled MSM-5525.IC part number
How far are you from Bitburg I was stationed there in 1980-82?
I'm at greater Hamburg here, about 400km north.
Pretty long time ago, i was born in 1982.
I put the mashine back to duty, as it does a good job even without that display.
I found a german dealer who seems to have them, i'll call him next week, maybe i'm lucky.
greetings,
Stephan
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.