Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools......

Rework -- cleaning up through-holes
Rework -- cleaning up through-holes
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 18th March 2007, 09:22 PM   #1
jackinnj is offline jackinnj  United States
diyAudio Member
 
jackinnj's Avatar
 
Join Date: Apr 2002
Location: Llanddewi Brefi, NJ
Rework -- cleaning up through-holes
Default Rework -- cleaning up through-holes

Saw this in QST -- to clean up that PCB through-hole mess take a wooden toothpick - sharpen the edge with a diag (or nail cutter), heat with your soldering iron and push the solder through.
  Reply With Quote
Old 20th March 2007, 05:14 PM   #2
calum112 is offline calum112  United Kingdom
diyAudio Member
 
Join Date: Mar 2007
That's an interesting tip!

We had a problem with a couple of through-holes being blocked after rework, so we couldn't get the components in afterwards, the board was sapping the heat and the component melted before the solder in the hole would . In the end it was solved by preheating the board and attacking it with a soldering iron each side, all the whilst pushing the new component in: I'll give your idea a whirl if it happens again, it would have been soooo much easier.
  Reply With Quote

Reply


Rework -- cleaning up through-holesHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
a tuner for $1.64 to rework and case jaudio Analogue Source 4 15th June 2008 03:22 PM
SMD Rework Stations Reccomendations? Zero Cool Equipment & Tools 2 23rd March 2008 03:35 PM
Pace soldering/rework station speakerguy79 Parts 4 31st May 2007 05:54 PM
Using heat Lamps for DIY IR rework fr0st Parts 0 23rd July 2004 01:43 PM
PACE MBT Rework Station on Ebay damonpip Swap Meet 1 14th December 2003 10:48 PM


New To Site? Need Help?

All times are GMT. The time now is 11:57 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki