Sequential power-up of amp / preamp - diyAudio
Go Back   Home > Forums > General Interest > Everything Else

Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools......

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 2nd March 2007, 05:26 AM   #1
diyAudio Member
 
Join Date: Oct 2006
Default Sequential power-up of amp / preamp

have just completed construction on a vacuum tube preamp (Aikido) and have it driving an AKSA 55N. In the preamp, I use a time-delay of 30 seconds to warm the heaters prior to switching on the HT supply. I then manually switch on the AKSA power amp.

On turn-off, I switch-off the AKSA power amp, then wait a few seconds before switching of the preamp. I really do not want to risk anything nasty if I get the order of switch-off incorrect.

So, I was thinking of building a power distributor. It would consist of two IEC outlets, one to the preamp, the other to the power amp. On switch-on, the device would power-up the preamp. Then after 1 minute, it would power-up the AKSA power amp. On switch-off, the device would power down the AKSA, then after, say 30 seconds switch off the preamp.

My voltage is 115VAC (actually more like 123VAC from my house outlets).

Does anyone have any ideas?

Thanks,
Charlie
  Reply With Quote
Old 2nd March 2007, 07:00 AM   #2
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
Hi,
ne555 timers could achieve this staggered power up.
Instant off for the power amp on power down.

If you want a bit of belt and braces you could add a relay to the power amp that uses a pair of volt free contacts to initiate the shut down timer in the pre-amp supply.
__________________
regards Andrew T.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need to make sequential power strip digital desire Solid State 1 20th July 2007 02:57 PM
Sequential soft start PSU ideas chris ma Power Supplies 11 2nd May 2005 09:15 PM
Sequential LED driver. imix500 Parts 15 13th August 2004 03:41 PM
preamp fie 6L6 PP power amp? trespasser_guy Tubes / Valves 3 1st June 2003 03:14 PM
sequential power switching themadhippy Everything Else 4 18th May 2003 11:51 PM


New To Site? Need Help?

All times are GMT. The time now is 10:25 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2