Computer semiconductor characteristic curve Project

locky_z · 30th April 2006, 08:10 AM

I'm doing My Project is "Computer semiconductor characteristic curve" (My english is bad.So Just Show the test result.)

My project link(China) is http://www.hifidiy.net/bbs/boke.asp?...wtopic.92.html

This instrument can test MOSFET / JFET / transistor / diode / SCR / resistance....
Can Show
Ic->Hfe curve
Vbe(Vgs)->Ic(Id) curve
Vce(Vds)->Ic(Id) curve

The VCE measure range from 0 to 36V
The IC measure range from 2mA to 3A

this 11's 2SK216 Vgs->Id curve

Netlist · 30th April 2006, 11:09 AM

Looks very nice. I only we could find someone to translate.
I presume the device is somehow connected to the PC via USB?

/Hugo

locky_z · 3rd May 2006, 07:38 AM

I use LPT port to connect PC
The component just use below
TDA2030 x3
LTC1090/LTC1290 x 1
M62359 x1
CD4050 x1
74HC595 x1
TL431 x 1
78L05 x1
7812 x1
and some other general component

the pict is two matching 2SA733 Ic->Hfe curve

jacco vermeulen · 3rd May 2006, 09:13 AM

Locky-Z,

will you make the board layout and the programming file available so that we can build a curve tracer too ?
What does the collector/drain supply look like ?

locky_z · 4th May 2006, 05:17 AM

I use 3 Channel DAC to driver 3 x TDA2030 as B/C/E Channel Power Supply.

When Channel_C is output 38V,Channel_E is 2V,so VCE is +36V.
When Channel_C is output 2V,Channel_E is 38V,so VCE is -36V.
So we can test P or N type BJT/MOS/J-FET..... And only use single 40V power supply.

The circuit and PCB file as upper link.
But it is Chinese. and i don't know to translate to English.

3rd May 2006, 09:13 AM	#4
jacco vermeulen diyAudio Member Join Date: Oct 2004 Location: At the sea front, just under Rotterdam	Locky-Z, will you make the board layout and the programming file available so that we can build a curve tracer too ? What does the collector/drain supply look like ? __________________ Looks like Sponge Bob has killed another thread.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
intelligent semiconductor characteristic curve instrument	locky_z	Parts	14	6th November 2008 11:07 PM
Small computer sub project	Dr.EM	Subwoofers	1	6th December 2007 03:20 AM
Tube curve tracer project	andrei	Tubes / Valves	17	18th August 2007 12:49 PM
A little ol' computer speaker project	Smokehouse Bob	Full Range	13	4th February 2007 12:16 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th April 2006, 11:09 AM	#2
Netlist diyAudio Moderator Join Date: Jan 2003	Looks very nice. I only we could find someone to translate. I presume the device is somehow connected to the PC via USB? /Hugo

4th May 2006, 05:17 AM	#5
locky_z diyAudio Member Join Date: Jun 2004 Location: XH	I use 3 Channel DAC to driver 3 x TDA2030 as B/C/E Channel Power Supply. When Channel_C is output 38V,Channel_E is 2V,so VCE is +36V. When Channel_C is output 2V,Channel_E is 38V,so VCE is -36V. So we can test P or N type BJT/MOS/J-FET..... And only use single 40V power supply. The circuit and PCB file as upper link. But it is Chinese. and i don't know to translate to English.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)