diyaudio IRC channel

Nixie · 30th April 2006, 04:44 AM

I'm a member of several forums that have associated IRC channels or chatrooms, and it has generally worked out very well. This is an interest check about it. I noticed at least one other thread where someone suggested this, but it has no replies, so I figure I'd give it a try with hopefully better luck.

Large networks are better because they'll still be around in a few years, but most do not have much in the way of services. Rizon seems the best compromise, so for the time being I'll hold #diyaudio there. If any diyaudio mods from here are interested, PM me your registered nick and I'll add you as admin/op/hop to the channel.

Nixie · 5th May 2006, 02:55 AM

I have surgery for a collapsed lung tomorrow (they have to cut out the leaking part), so I'll not be in the channel for a few days.

Cal Weldon · 5th May 2006, 03:01 AM

Best wishes for a safe surgery and speedy recovery Nixie.

kelticwizard · 5th May 2006, 04:41 AM

Nixie:

Here's hoping for a successful day and a fast recovery.

Looking forward to seeing you back on this board pronto!!

anatech · 5th May 2006, 12:49 PM

Good luck Nixie!

-Chris

Nixie · 7th May 2006, 11:51 PM

Thanks everyone, it's done and they pulled out the tube today. I'll be home tomorrow if the next X-ray is all clear.

Tekko · 8th May 2006, 08:59 AM

Im in.

Nixie · 9th May 2006, 07:28 PM

Well, four people in now, not counting the bot hehe
The audioasylum forum also has an IRC channel, but seems to have no DIY discussion there. I'll monitor from time to time and try to find out if anyone there is into DIY so I can get them to come over.

bigwill · 9th May 2006, 07:43 PM

I'm in

An active DIY audio channel would be so awesome

DragonMaster · 30th May 2006, 10:42 PM

Simple to setup too!

30th April 2006, 04:44 AM	#1
Nixie Banned Join Date: Jan 2006 Location: Vancouver, BC	diyaudio IRC channel I'm a member of several forums that have associated IRC channels or chatrooms, and it has generally worked out very well. This is an interest check about it. I noticed at least one other thread where someone suggested this, but it has no replies, so I figure I'd give it a try with hopefully better luck. Large networks are better because they'll still be around in a few years, but most do not have much in the way of services. Rizon seems the best compromise, so for the time being I'll hold #diyaudio there. If any diyaudio mods from here are interested, PM me your registered nick and I'll add you as admin/op/hop to the channel.

5th May 2006, 03:01 AM	#3
Cal Weldon Speakerholic diyAudio Moderator Join Date: Jan 2004 Location: British Columbia	Best wishes for a safe surgery and speedy recovery Nixie. __________________ Next stop: Margaritaville Some of Cal's stuff \| Cal Weldon Consulting

5th May 2006, 04:41 AM	#4
kelticwizard diyAudio Member Join Date: Sep 2001 Location: Connecticut, The Nutmeg State	Nixie: Here's hoping for a successful day and a fast recovery. Looking forward to seeing you back on this board pronto!! __________________ "A friend will help you move. A really good friend will help you move a body." -Anonymous

30th May 2006, 10:42 PM	#10
DragonMaster diyAudio Member Join Date: Dec 2003 Location: Montreal	Simple to setup too! __________________ Antoine http://dmsaudio.ca/

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th May 2006, 02:55 AM	#2
Nixie Banned Join Date: Jan 2006 Location: Vancouver, BC	I have surgery for a collapsed lung tomorrow (they have to cut out the leaking part), so I'll not be in the channel for a few days.

5th May 2006, 12:49 PM	#5
anatech diyAudio Moderator Join Date: Jun 2004 Location: Georgetown, On	Good luck Nixie! -Chris

7th May 2006, 11:51 PM	#6
Nixie Banned Join Date: Jan 2006 Location: Vancouver, BC	Thanks everyone, it's done and they pulled out the tube today. I'll be home tomorrow if the next X-ray is all clear.

8th May 2006, 08:59 AM	#7
Tekko diyAudio Member Join Date: Jan 2005	Im in.

9th May 2006, 07:28 PM	#8
Nixie Banned Join Date: Jan 2006 Location: Vancouver, BC	Well, four people in now, not counting the bot hehe The audioasylum forum also has an IRC channel, but seems to have no DIY discussion there. I'll monitor from time to time and try to find out if anyone there is into DIY so I can get them to come over.

9th May 2006, 07:43 PM	#9
bigwill diyAudio Member Join Date: Dec 2004 Location: UK	I'm in An active DIY audio channel would be so awesome

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Creating 5.1 Multi Channel sound from 2 channel	jenkrich	Everything Else	5	1st September 2009 07:29 AM
diyaudio moderator vs diyaudio member	Leolabs	Everything Else	6	18th June 2006 08:19 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read