audio switch automatic

palmmed · 16th March 2006, 01:30 AM

Hello,

hope someone can help... I want something that can have 2 audio inputs, one from cell phone one from mp3 player, but will automatically switch from the primary(mp3) to the secondary (cell) input and then back again when the call is over (audio is ended). Thanks in advance.

AndrewT · 17th March 2006, 06:44 PM

Hi,
ESP has a circuit for auto switch on to control a power amp from audio signal exiting the pre.

You could use that to control a switch over relay to bring in the cell phone but without any of the delays.

Alternatively, there may be a DC signal out of the cell phone connector to alert connected equipment to reception of incoming radio signal. That DC could operate a transistor switch into relay.

All you have to do is identify the pin and determine if the DC signal goes low or goes high.

palmmed · 18th March 2006, 07:59 PM

Thanks for the heads up... do you have a link, and try to remember I know nothing of ciruitry. how hard would this be built for a novice? Thanks again

AndrewT · 18th March 2006, 11:53 PM

Hi,
look up Elliot Sound Products (ESP) at
http://sound.westhost.com/projects.htm

16th March 2006, 01:30 AM	#1
palmmed diyAudio Member Join Date: Jun 2004 Location: chjm	audio switch automatic Hello, hope someone can help... I want something that can have 2 audio inputs, one from cell phone one from mp3 player, but will automatically switch from the primary(mp3) to the secondary (cell) input and then back again when the call is over (audio is ended). Thanks in advance.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Audio Jack Switch - How to?	JTomo	Everything Else	3	9th June 2009 12:07 AM
Using TRS Audio Jack Switch	shivia	Analog Line Level	1	7th August 2007 10:44 AM
A/B switch for car audio	Mikerobe	Parts	0	2nd January 2007 11:50 PM
5.1 Audio Switch?	Pilotandy	Parts	2	4th November 2006 02:33 PM
Audio Auto Switch	mariorockero	Analogue Source	0	31st March 2004 02:30 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

17th March 2006, 06:44 PM	#2
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	Hi, ESP has a circuit for auto switch on to control a power amp from audio signal exiting the pre. You could use that to control a switch over relay to bring in the cell phone but without any of the delays. Alternatively, there may be a DC signal out of the cell phone connector to alert connected equipment to reception of incoming radio signal. That DC could operate a transistor switch into relay. All you have to do is identify the pin and determine if the DC signal goes low or goes high.

18th March 2006, 07:59 PM	#3
palmmed diyAudio Member Join Date: Jun 2004 Location: chjm	Thanks for the heads up... do you have a link, and try to remember I know nothing of ciruitry. how hard would this be built for a novice? Thanks again

18th March 2006, 11:53 PM	#4
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	Hi, look up Elliot Sound Products (ESP) at http://sound.westhost.com/projects.htm