Vertical FETs quote an "Rds on" figure in the datasheets.
This puts another SOAR boundary into the low voltage area of the curve.
Does a Lateral FET have a similar Rds on value?
I cannot find one for 2sj162/k1058
My circuit needs an Rds on value below 1.5ohms to keep the IV on the right (safe) side.
This puts another SOAR boundary into the low voltage area of the curve.
Does a Lateral FET have a similar Rds on value?
I cannot find one for 2sj162/k1058
My circuit needs an Rds on value below 1.5ohms to keep the IV on the right (safe) side.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.