diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Everything Else (http://www.diyaudio.com/forums/everything-else/)
-   -   How do you do this in Eagle CAD? (http://www.diyaudio.com/forums/everything-else/6476-how-do-you-do-eagle-cad.html)

djnigma 1st October 2002 07:02 AM

How do you do this in Eagle CAD?
 
2 Attachment(s)
How do you fill in the blank PCB area around your tracks like in the picture below. Is there some method which will fill in the blank space but keep a certain distant from the tracks, creating a thin outline around them? I have the demo version of Eagle CAD.

Like this:

mevangel 1st October 2002 08:50 AM

Re: How do you do this in Eagle CAD?
 
Trace a polygon on the layer and then associate it with the proper net. This can be done using the "name" function.
Example: for a ground plane give the polygon the name you used for ground in the schematic (typically "GND").
Please read the Eagle tutorial.
Best regards.
Marco

djnigma 1st October 2002 09:26 AM

Thankyou. I actually got off ym lazy but and dug out the Tutorial and it is there in plain sight - sorry for being lazy.

For those of you who wan't to know, it's on page47 of the tutorial under "copper pouring".

To make a ground plane:

> Goto Board
> Type "RIPUP GND" in the entry box
> Click the POLYGON icon on the toolbar
> Type "GND" in the entry box
> Draw a rectangle around your PCB
> Click the RATSNEST icon on the toolbar
> Hey presto, a pretty groundplane!

:cool:

jackinnj 10th October 2002 05:23 PM

How to do it in Ultiboard
 
Ultiboard allows you to do the same thing and attach to a net. The procedure is:
>Traces
>Copper Area
>Place
You can then use the cursor to draw around the areas to place the copper area. When you connect the lines the program asks you to confirm what you have just done.

In Ultiboard you can specify the separation from pads -- very helpful if you DIY boards yourself.

Important -- make sure that you specify the correct layer before starting. For some designs I use the bottom layer for analog and the top layer for digital.


All times are GMT. The time now is 04:37 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2