noble stereo pot

mantisory · 28th April 2005, 02:18 PM

Hi all,
I am just wondering if anyone has a pin diagram for this Noble 50K 30 stepped stereo attenuator? I suppose I could hook it up to a meter...

Thanks
Mantisory

cfitzger · 28th April 2005, 02:27 PM

Not sure if this is yours exactly but might help..

NOBLE

mantisory · 28th April 2005, 02:39 PM

no, that one's quite a bit different...although the pin configuration may be the same...
thanks!

dqswim · 28th April 2005, 02:48 PM

If you have the attenuator I would just hook it up to a meter, much easier that finding the pinout and you know you dont have to fool with orientation. I just did it recently for the noble 25k pot.

mantisory · 28th April 2005, 03:07 PM

yeah, i kinda thought that'd probably be the easiest - just got my MM yesterday!

thanks
Mantisory

motherone · 28th April 2005, 05:39 PM

I have a few of these, too... Did you find them from that seller on Ebay? Anyhow, they have the same pinout as the Alps pots. However, there is an additional pin that is next to the 3 pins in the center for a loudness tap on mine, which I just cut off.

Mike

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Noble 100K pot.	mattjk	Swap Meet	0	21st January 2008 02:50 AM
Noble resistors	jkraxi	Parts	3	5th January 2008 02:40 AM
alps or noble?	lanchile07	Chip Amps	8	21st October 2007 03:28 AM
Which pot? Noble or Alps? Or another?	deiksac	Parts	1	12th May 2007 04:47 AM
Need help to connect my Noble pot	kanaddict	Chip Amps	3	26th January 2005 04:49 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

28th April 2005, 02:27 PM	#2
cfitzger diyAudio Member Join Date: Mar 2005 Location: Virginia	Not sure if this is yours exactly but might help.. NOBLE

28th April 2005, 02:39 PM	#3
mantisory diyAudio Member Join Date: May 2002 Location: toronto	no, that one's quite a bit different...although the pin configuration may be the same... thanks!

28th April 2005, 02:48 PM	#4
dqswim diyAudio Member Join Date: Nov 2003 Location: il	If you have the attenuator I would just hook it up to a meter, much easier that finding the pinout and you know you dont have to fool with orientation. I just did it recently for the noble 25k pot.

28th April 2005, 03:07 PM	#5
mantisory diyAudio Member Join Date: May 2002 Location: toronto	yeah, i kinda thought that'd probably be the easiest - just got my MM yesterday! thanks Mantisory

28th April 2005, 05:39 PM	#6
motherone diyAudio Member Join Date: Apr 2003 Location: Seattle	I have a few of these, too... Did you find them from that seller on Ebay? Anyhow, they have the same pinout as the Alps pots. However, there is an additional pin that is next to the 3 pins in the center for a loudness tap on mine, which I just cut off. Mike

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)