Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools......

Aluminium chassis finishing
Aluminium chassis finishing
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 21st August 2002, 12:35 PM   #1
FrankDIY is offline FrankDIY  Canada
diyAudio Member
FrankDIY's Avatar
Join Date: Mar 2001
Location: Quebec City
Default Aluminium chassis finishing

Hello, I did a few search on the subject and I found that it was only partially covered. The question is how do you finish your aluminium chassis? Is there simple techniques to get a nice and professional finish? I read about sanding with a wet sandpaper, brushing, etc. I just want to get a nice finish from a Hammond aluminium box.

Thanks in advance for your answers.
Imagination is more important than knowledge. knowledge is limited, imagination encircles the world. Albert Einstein
FrankDIY's Audio Corner
  Reply With Quote


Aluminium chassis finishingHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aluminium vs steel chassis Rob11966 Parts 117 24th October 2016 05:19 PM
aluminium box space-cake Parts 1 19th September 2006 01:34 PM
An other finishing fung Multi-Way 16 10th April 2006 05:12 AM
Not really sure where to put this...but...source for chassis cutting/finishing? Glowbug Everything Else 4 15th March 2006 07:37 PM
Extruded Aluminium Chassis fireman Chip Amps 7 1st June 2004 04:13 PM

New To Site? Need Help?

All times are GMT. The time now is 02:27 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio