diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Everything Else (http://www.diyaudio.com/forums/everything-else/)
-   -   Repairing Panasonic TV (http://www.diyaudio.com/forums/everything-else/50732-repairing-panasonic-tv.html)

lomtik 1st February 2005 07:13 PM

Repairing Panasonic TV
 
Hi,
My 6-years old panasonic (27inch I think, I'll post the model number later) has started to lose picture sometimes. Sometimes it becomes distorted, sometimes dissapears at all.
When you smack it, it comes back.

What I've tried to do.
I have examined the board and found one connection without solder on it, so I've fixed it up and tv was good for another 2 weeks.
Now, I don't see any cold soldering problems.

Where should I start? I've looked at the huge TV repair faq pages (I think Sam's), but there are too many things. If you could help me to pinpoint the problem that would be great.

I have a voltmeter, but no oscilloscope.


Thanks

Netlist 1st February 2005 07:23 PM

These discussions are not allowed here at DiyAudio due to the high risk involved on working at TV sets.
Feel free however to join other discussions all over the place :)

/Hugo:)


All times are GMT. The time now is 06:19 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2