I was looking at few designs on these forums for an audio equipment rack and found a few that used threaded rod and shelves method - really basic.....so I tried it out and im very happy
Simple, quick, cheap and a satisfying project.
It cost me NZ$40 for the rods and nuts/washers and NZ$10 for the wood. So total is about $35 USD! plus paint though.
Anyway here's some pics
Simple, quick, cheap and a satisfying project.
It cost me NZ$40 for the rods and nuts/washers and NZ$10 for the wood. So total is about $35 USD! plus paint though.
Anyway here's some pics
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.