SoundCraftsmen PCR Regulator Schematic

Zero Cool · 1st December 2004, 04:24 PM

I found my copies of the Soundcraftsmen PCR Power supply for those that are interested in it.

very interesting design. I would appreciate comments on its design, operation etc.

i dont know if i am allowed to post it here. So for now please email me and i will send it to you.

If someone knows if that would be allowed, please let me know.

Zero

raincheck · 1st December 2004, 05:00 PM

Hi,
I have two PCR 800's, each with one channel failed that Im using as monobloxs.....hopefully they will last until I get my Aleph 5's and Aleph 1.2's finally built. Could you email me the schematic at raincheck@covad.net or tquinn@redback.com

Thanks,
Tom

still4given · 9th March 2005, 06:32 PM

Hi Zero,

I just picked up a PCR-800 and the driver board has some missing parts. I would love to have a copy of the schematic so that I could fix it.

Can't find your email. If you are still monitoring this thread, would you please send me a copy of the schematic? I would be very grateful.

Thanks Terry

still4given@yahoo.com

AmpHead · 26th July 2005, 11:40 PM

Zero Cool,

I know this is an old thread, but I would be interested in the schematics too!

mail to pondnut@yahoo.com

Thanks

tomw75 · 18th May 2010, 09:40 AM

from tomw75-seems a lot of guys need PCR schematics including me
please e-mail what you have to
tomandshir@aol.com
thanks,tom

1st December 2004, 04:24 PM	#1
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	SoundCraftsmen PCR Regulator Schematic I found my copies of the Soundcraftsmen PCR Power supply for those that are interested in it. very interesting design. I would appreciate comments on its design, operation etc. i dont know if i am allowed to post it here. So for now please email me and i will send it to you. If someone knows if that would be allowed, please let me know. Zero

1st December 2004, 05:00 PM	#2
raincheck diyAudio Member Join Date: Dec 2001 Location: Avalon	I would like a copy Hi, I have two PCR 800's, each with one channel failed that Im using as monobloxs.....hopefully they will last until I get my Aleph 5's and Aleph 1.2's finally built. Could you email me the schematic at raincheck@covad.net or tquinn@redback.com Thanks, Tom __________________ In The Days Before Rock 'n ' Roll

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Audio Note M2 regulator schematic	drobert	Tubes / Valves	1	10th November 2007 03:09 AM
Soundcraftsmen Pre-amp	enzedone	Solid State	2	27th March 2007 01:07 AM
need help understanding voltage regulator schematic (using CCS) from Raleigh Audio	jarthel	Tubes / Valves	21	29th September 2006 11:08 AM
irf610, irf9610 voltage regulator schematic needed for +/-15V	sunrise	Solid State	4	22nd June 2006 08:57 PM
6.3v Heater Regulator Schematic	cantskienuf	Tubes / Valves	3	29th April 2005 12:20 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th March 2005, 06:32 PM	#3
still4given diyAudio Member Join Date: Oct 2004	Hi Zero, I just picked up a PCR-800 and the driver board has some missing parts. I would love to have a copy of the schematic so that I could fix it. Can't find your email. If you are still monitoring this thread, would you please send me a copy of the schematic? I would be very grateful. Thanks Terry still4given@yahoo.com

26th July 2005, 11:40 PM	#4
AmpHead diyAudio Member Join Date: Jul 2005 Location: Iowa - USA	Zero Cool, I know this is an old thread, but I would be interested in the schematics too! mail to pondnut@yahoo.com Thanks

18th May 2010, 09:40 AM	#5
tomw75 diyAudio Member Join Date: May 2010 Location: surfside beach,sc	from tomw75-seems a lot of guys need PCR schematics including me please e-mail what you have to tomandshir@aol.com thanks,tom

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)