diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Everything Else (http://www.diyaudio.com/forums/everything-else/)
-   -   Line Level Specifications (http://www.diyaudio.com/forums/everything-else/34942-line-level-specifications.html)

M.Joshi 28th May 2004 05:07 PM

Line Level Specifications
 
Hi,

Does anyone know where I can find the typical specifications for a line level signal i.e voltage level etc as I would like to know how long I can run a length of cable before a distribution amplifier is required?

DrDeville 1st June 2004 12:07 AM

Hi M,

I'm no expert, but I'd say 1 Vrms gets you in the ballpark.

If you want a nifty intro to the physics of cables and other nifty audio stuff, check out:

http://www.st-andrews.ac.uk/~www_pa/...io/Analog.html

And I'm not recommending it soley because of my heritage. ;)

Best,

George Ferguson


All times are GMT. The time now is 09:34 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2