diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Everything Else (http://www.diyaudio.com/forums/everything-else/)
-   -   Measuring electronics frequency response accurately + cheaply (http://www.diyaudio.com/forums/everything-else/33083-measuring-electronics-frequency-response-accurately-cheaply.html)

eRiCdWoNg 27th April 2004 11:12 PM

Measuring electronics frequency response accurately + cheaply
 
I have basic electronics knowledge, however I *really* would like to accuartely measure some of my component's frequency response. Mainly my DJ mixer and my multipurpose mixer. Im not one to claim I can hear the differences between radio shack wire and kimber cable either. However there is a definate difference in high frequency sound between my DJ mixer and the Spirit Folio F1 multipurpose mixer I have. The multipurpose mixer is bright as balls compared to the DJ mixer. I have tried to crudely test it by using my real time analyzer, played with swept sine waves on a test CD, however its only good to 1 dB and I have no clue how accurate that RTA is anyway.

Is there any good software for a PC? How about stand alone equipment? Any recommendations on anything? Thanks.

SY 27th April 2004 11:24 PM

I use a combination of scope/generator, software from Dazyweb Labs, and Speaker Workshop, depending on the frequency range, voltage level, and time budget.


All times are GMT. The time now is 11:08 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2