basic questions for new guy - diyAudio
Go Back   Home > Forums > General Interest > Everything Else

Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools......

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th January 2004, 04:23 AM   #1
diyAudio Member
 
Join Date: Oct 2002
Location: Birmingham, Alabama
Default basic questions for new guy

I picked up a solder station, but I don't know what types of tips that I should use or have available for use?

The station is a weller wes51. I will be starting with some point to point stuff for a gainclone or 12.

Then maybe some pcb board contacts for another amp.

Also what is a good type of wire to use for internal wiring of amps? Source for it as well?

Where can i find a decent power supply and what should I look for in a basic oscilloscope?

What other basic tools items should i look to get over the next few months?

TIA
  Reply With Quote
Old 12th January 2004, 12:49 AM   #2
diyAudio Member
 
Join Date: Oct 2002
Location: pittsboro, NC
I prefer the "single flat" tips, 0.062" size (ETAA) or the 031 conical.
brochure here:
http://www.cooperhandtools.com/liter...ler/550147.pdf

I find the smaller pointed tips require longer to get heat to the part being soldered.
You might use a rule of thumb of width of tip = width of lead you are soldering, of course, if you are trying to solder a large ground plane you will need a lot of heat.
Get a catalog from Digikey (www.digikey.com) or mouser (www.mouser.com), both are reputable and low priced.
I scrounged a lot of 14 AWG wire for my Zen from a blown UPS, generally, any insulated wire is OK to start with, you can get the exotic stuff later.
You could try Home Depot or Lowes for "hook up" wire, 16 or 18 AWG, and there is always Radio Shack when you just can't wait.
A great place for used test equiptment is e-bay, scopes run about $1.50 a MHz, or look for one of the add-ons for your PC, there was a 1 MHz module from OZ for about $88, AIR. (serach for "oscilloscope USB".
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Some basic questions about Q wigginjs Multi-Way 8 20th October 2004 07:22 PM
Basic LED Questions lgreen Parts 22 19th December 2003 06:26 PM
Basic Questions DarkMage Multi-Way 2 5th November 2003 02:51 PM
Some basic questions... Ziller Everything Else 5 13th January 2002 02:49 PM
Basic Questions wnichol Solid State 4 16th November 2001 04:59 AM


New To Site? Need Help?

All times are GMT. The time now is 05:47 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2