Signal generator test illustrations - diyAudio
Go Back   Home > Forums > General Interest > Everything Else

Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools......

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th March 2014, 01:14 PM   #1
diyAudio Member
 
Join Date: Mar 2014
Location: WESTMINSTER, SC
Default Signal generator test illustrations

I have a B&K 200D signal generator & B&K 177 VTVM, but do not know how to set them up to align the receive on transistor or tube type radios.
I would prefer an illustrated step by step diagram about where to set each control on both devices. I have a Motorola Floor Model AM radio built in 1941 which I did a re-cap, it does play but needs tuning.
any suggestions ?

thanks:
Golden Eagle
  Reply With Quote
Old 15th March 2014, 06:41 PM   #2
DF96 is offline DF96  England
diyAudio Member
 
Join Date: May 2007
Find the service sheet for the radio, or a similar radio. That should give alignment instructions. However, this will assume that the reader knows something about receivers.
  Reply With Quote
Old 21st March 2014, 05:18 AM   #3
diyAudio Member
 
Join Date: Jul 2003
Location: Dona paula, Goa
If it is a superheterodyne receiver, you will have to allign the IF stages, starting from the last stage. At the minimum, you should know what is the IF frequency of the receiver.

Gajanan Phadte
  Reply With Quote
Old 21st March 2014, 06:36 AM   #4
diyAudio Member
 
Join Date: Jul 2003
Location: Dona paula, Goa
Then go further.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Jitter Test Signal (J-test Signal) with MATLAB merlijnv Digital Source 40 6th May 2013 04:36 AM
Test Signal for max power test of Class D? eem2am Class D 19 27th August 2012 09:22 AM
Help on my signal generator hungdn Tubes / Valves 5 21st April 2012 11:03 AM
Signal Generator: Which one to buy ? What to look for in a signal generator ? HP8903B Tubes / Valves 45 12th January 2012 09:01 PM
signal generator help hizz_eye Solid State 2 3rd March 2005 10:25 AM


New To Site? Need Help?

All times are GMT. The time now is 01:09 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2