Sound quality of old/aged speakers - diyAudio
Go Back   Home > Forums > General Interest > Everything Else

Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools......

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th March 2013, 11:19 AM   #1
diyAudio Member
 
Join Date: Mar 2013
Default Sound quality of old/aged speakers

Does the sound quality decrease in a speaker by prolonged usage or after some years? I was just thinking, that the voice coil or the magnet might get weak and the sound quality might diminish after using the speakers for a long time or after aging. Does speaker suffer such things?
  Reply With Quote
Old 19th March 2013, 11:38 AM   #2
Mooly is offline Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007
I think the biggest problem is physical deterioration of the cone and particularly the cone surround. Thats a "mechanical" issue due to the parts disintegrating. Voice coils should not change with age or usage within the intended current carrying capacity of the coil.

Magnets... I've never heard of sensitivity reducing for normal speakers due to flux loss as a general rule, although there probably exist some drivers where poor materials made this a factor (such as ribbons ? am I imagining that or have I read something somewhere)
__________________
-------------------------------------------------------
Installing and using LTspice. From beginner to advanced.
  Reply With Quote
Old 19th March 2013, 11:44 AM   #3
diyAudio Member
 
Join Date: Mar 2013
Thanks a lot Mooly
  Reply With Quote
Old 20th March 2013, 03:40 PM   #4
diyAudio Member
 
Join Date: Dec 2005
Location: Kuala Lumpur
Add to the list - Stuffing rotting away, PVA glue disappearing so the cabinets come apart and ferrofluid drying out
  Reply With Quote
Old 30th March 2013, 05:22 PM   #5
diyAudio Member
 
Join Date: Jun 2010
Capacitors degrading or dying over time would change the performance of the crossover. I've heard of people needing recap older speakers to maintain performance. Even though the 40 year old stuff I have all sounds great to me because it was well cared for (zero degradation of paper because always kept indoors for instance), I imagine if the paper was degrading that things like the crossover might well be degrading as well. Things like resistors or transistors shouldn't degrade from what I understand though, it's just capacitors.
  Reply With Quote
Old 30th March 2013, 05:36 PM   #6
diyAudio Member
 
Join Date: Feb 2013
Too many variables to say. Stored in the right environment? Driven by the correct amp? Mostly used for Sinatra, and not Rush? I am currently using some old Klipsch Cornwalls...never restored, but superb sound. Also have the original drivers in a 1950's Magnavox console, and they are wonderful!
  Reply With Quote
Old 11th April 2013, 07:13 PM   #7
sco1t is offline sco1t  United Kingdom
diyAudio Member
 
sco1t's Avatar
 
Join Date: Mar 2010
Location: Northeat England
I've got 2 old 1950's 10 inch 15 Ohm Celestion speakers and they sound very good on a nice valve amp good on transistors too!!
  Reply With Quote
Old 16th April 2013, 12:36 PM   #8
diyAudio Member
 
Join Date: Dec 2012
I repaired a IBM laptop which noised when the music was playing, later I found it has a problem of the speaker, the paper of the speaker lost of elasticity.
  Reply With Quote
Old 16th April 2013, 01:48 PM   #9
JMFahey is online now JMFahey  Argentina
diyAudio Member
 
JMFahey's Avatar
 
Join Date: Mar 2009
Location: Buenos Aires - Argentina
Paper cones degrade slowly, it may take 40 years for it to become dry/crumbly.
Less if it sits in the Sun.
Unlikely at home but sometimes happens in commercial installations.

Foam edges rot in 10 years, that's a given and the reason that there are so many "refoaming" kits in the market.
Sunlight can absolutely destroy it in a year or so, if continuous exposure.

Alnico magnets easily lose charge, 40% or more is not unusual; JBL for example offers a regaussing service for old speakers as a routine.

Ceramics are forever.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Quality Control differences = variations in sound quality? KT Class D 3 4th June 2014 12:02 AM
Sound quality of "PI" speakers? G Multi-Way 19 22nd January 2014 01:52 AM
sound quality vs sound quantity. Etocynned Full Range 203 26th May 2012 03:36 AM
Level-dependend Sound Quality by certainly Bass Drivers - very bad sound at low level tiefbassuebertr Multi-Way 1 2nd April 2010 04:12 AM
Question about aged Dynacos Bender Multi-Way 1 6th June 2005 10:07 AM


New To Site? Need Help?

All times are GMT. The time now is 04:31 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2