resonance in a LCR series

Helix · 5th February 2002, 12:47 AM

URGENT HELP REQUIRED!

I have a LCR series circuit, i have the following problem finding the Q.
F=resonant req
B=bandwidth

I thought the Q = F/B

where B = R/(2*pi*L)

my inductor is 68mH
capacitor = 2.2uF
Resistor = 100Ohm

so i found resonance at 411 Hz

But i calculate Q to be 1.75? shouldn't it be about 0.7?

Helix · 5th February 2002, 01:00 AM

sorted!
i fergot to add the DC resistance of the inductor (it's about 150ohms or so), perhaps it's time for another cup of coffee!

5th February 2002, 12:47 AM	#1
Helix diyAudio Member Join Date: Jul 2001 Location: UK	resonance in a LCR series URGENT HELP REQUIRED! I have a LCR series circuit, i have the following problem finding the Q. F=resonant req B=bandwidth I thought the Q = F/B where B = R/(2piL) my inductor is 68mH capacitor = 2.2uF Resistor = 100Ohm so i found resonance at 411 Hz But i calculate Q to be 1.75? shouldn't it be about 0.7?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Three 10" 4Ohm subs, wired in series or series-parallel?	Nagamitsu	Car Audio	24	10th May 2009 04:24 AM
Air Resonance	davidross	Full Range	15	17th April 2009 10:10 PM
series crossover with resonance trap for tweeter?	madinoz	Multi-Way	0	8th June 2005 03:03 AM
The best(?) oscillation mode is series resonance	peranders	Digital Source	24	19th May 2004 08:10 PM
Quality of Hammond 300 series power transformers compared to 200 series?	G	Tubes / Valves	8	21st September 2003 03:27 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th February 2002, 01:00 AM	#2
Helix diyAudio Member Join Date: Jul 2001 Location: UK	sorted! i fergot to add the DC resistance of the inductor (it's about 150ohms or so), perhaps it's time for another cup of coffee!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)