Recording A Cell Phone Call

ryevick · 14th January 2012, 04:28 AM

I have a BOSS PS-5 Pitch Shifter pedal I use with my guitar and I want to use it to prank call/play a joke on someone I know

(haha... you'd have to know them... and I'm really bored)... anyway I want to record it on my Olympus VN-4100PC Voice Recorder... I bought a Radio Shack Wireless Phone Recording Controller 17-855 on ebay to record it but the problem I'm having is the headset I have has 2 1/8" output cables... one for the microphone and one for the headphone/ear. I need to be able to run the mic cable through the pedal (1/4" input and output) and then bring it back together with the ear cable, run them both into a Y adapter (2 1/8 female to 1 3/32 male) so I can input it into the Recording Controller. I haven't bought my adapters yet but I'm starting to doubt whether the layout of this will work when they get merged back together as the go into the controller and the into the phone. Any suggestions or ideas? Thanks!

Just FYI the jack sizes are:
3/32 stereo male from the controller to cell phone
1/8 mono male from the controller to recorder
3/32 stereo female input for the headset
both headset cables are 1/8 stereo male
both input and output on the pedal are 1/4 mono

Pano · 14th January 2012, 04:38 AM

Funny idea! Assuming that you just want to shift your own voice, you'll have to route the headset mic (only) thru the Boss and see if it works OK with the mic. It may, or may not. If the mic needs DC to function, that could be a problem.

You may have to build the cable you need. 2.5mm split to 1.4" to go thru the pedal. And extension - cable female to male - that you can tap into might be easiest.

Good luck!

ryevick · 14th January 2012, 04:42 AM

I do want to shift my voice but I do really know squat about making cables. If I could get specs to what you're talking about I might be able to find someone to make it for me.

ryevick · 15th January 2012, 03:38 AM

Quote:

Originally Posted by Pano

Funny idea! Assuming that you just want to shift your own voice, you'll have to route the headset mic (only) thru the Boss and see if it works OK with the mic. It may, or may not. If the mic needs DC to function, that could be a problem.

You may have to build the cable you need. 2.5mm split to 1.4" to go thru the pedal. And extension - cable female to male - that you can tap into might be easiest.

Good luck!

I suppose I could use a regular SM-57 mic or something... would that work?

Pano · 15th January 2012, 04:27 AM

It might, but you still need to hear the call, somehow. For that you need a special cable.

ryevick · 15th January 2012, 04:57 AM

Quote:

Originally Posted by Pano

It might, but you still need to hear the call, somehow. For that you need a special cable.

If I knew what type cable or cable specs I would get it.

14th January 2012, 04:28 AM	#1
ryevick diyAudio Member Join Date: Jan 2012	Recording A Cell Phone Call I have a BOSS PS-5 Pitch Shifter pedal I use with my guitar and I want to use it to prank call/play a joke on someone I know (haha... you'd have to know them... and I'm really bored)... anyway I want to record it on my Olympus VN-4100PC Voice Recorder... I bought a Radio Shack Wireless Phone Recording Controller 17-855 on ebay to record it but the problem I'm having is the headset I have has 2 1/8" output cables... one for the microphone and one for the headphone/ear. I need to be able to run the mic cable through the pedal (1/4" input and output) and then bring it back together with the ear cable, run them both into a Y adapter (2 1/8 female to 1 3/32 male) so I can input it into the Recording Controller. I haven't bought my adapters yet but I'm starting to doubt whether the layout of this will work when they get merged back together as the go into the controller and the into the phone. Any suggestions or ideas? Thanks! Just FYI the jack sizes are: 3/32 stereo male from the controller to cell phone 1/8 mono male from the controller to recorder 3/32 stereo female input for the headset both headset cables are 1/8 stereo male both input and output on the pedal are 1/4 mono

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need design help with a phone call recording schematic	two0	Everything Else	12	13th April 2011 03:43 PM
Phone call from the GVMNT	picowallspeaker	The Lounge	6	8th June 2010 02:38 AM
What cell phone do you have?	blackwillam01	The Lounge	35	28th October 2009 03:27 AM
Horn for Cell phone	alexmoose	Multi-Way	1	9th August 2008 10:20 PM
Please help -- mystery phone call	Nixie	Everything Else	5	23rd February 2006 02:55 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th January 2012, 04:38 AM	#2
Pano diyAudio Moderator Join Date: Oct 2004 Location: North Carolina Blog Entries: 4	Funny idea! Assuming that you just want to shift your own voice, you'll have to route the headset mic (only) thru the Boss and see if it works OK with the mic. It may, or may not. If the mic needs DC to function, that could be a problem. You may have to build the cable you need. 2.5mm split to 1.4" to go thru the pedal. And extension - cable female to male - that you can tap into might be easiest. Good luck!

14th January 2012, 04:42 AM	#3
ryevick diyAudio Member Join Date: Jan 2012	I do want to shift my voice but I do really know squat about making cables. If I could get specs to what you're talking about I might be able to find someone to make it for me.

15th January 2012, 04:27 AM	#5
Pano diyAudio Moderator Join Date: Oct 2004 Location: North Carolina Blog Entries: 4	It might, but you still need to hear the call, somehow. For that you need a special cable.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)